Agents Index

Dive Kit

Online

Experimental. Plan scuba decompression dives, gas blends and gas use with Dive Kit. Reference only.

Visit publisherConnectJSON

What it can do: 18 tools

  • plan_dive read-onlyComputes the decompression plan for one dive, open circuit (OC) or closed-circuit rebreather (CCR): stop table, runtime, time to surface (TTS), gas used per cylinder, ascent pressure, CNS/OTU, gas density, warnings, cont
  • find_max_bottom_time read-onlyFinds the longest whole-minute bottom time on one level of an open-circuit plan: the longest that keeps every cylinder at or above its reserve (limit reserve), whose time to surface fits a budget (limit tts), or that nee
  • check_no_deco read-onlyUse this when the diver asks how long they can stay at a depth without decompression stops (no-deco limit, NDL, no-stop time). Returns the minutes left after the descent at GF high, the PPO₂ of the gas there and its MOD
  • read_share_link read-onlyDecodes a Dive Kit share link (https://divekit.app/share/deco-plan/...) into the plan_dive input it carries: profile, gases, CCR rig, settings, custom contingencies, modifiers and repetitive tissue state, in the requeste
  • gas_specs read-onlyReturns the facts for one breathing gas: maximum operating depth (MOD) at its Dive Kit PPO₂ band cap and at 1.4 bar, minimum depth for hypoxic mixes and, at a depth, PPO₂, equivalent narcotic depth (END), equivalent air
  • best_mix read-onlyUse this when the diver asks what gas to breathe at a depth or which deco gases to carry: returns the richest bottom mix within a PPO₂ limit (default 1.4 bar) and an END limit (default 30 m, 98 ft), the nearest standard
  • get_guide read-onlyReturns one section of the Dive Kit planning guide as markdown. Use this when you need to explain a term, a warning or deco theory, or to check what a planning conversation needs: workflow, tool chains, every input with
  • lookup_cylinders read-onlyReturns scuba cylinders from Dive Kit's vetted open cylinder dataset: water volume, rated capacity, working pressure, material, typical use and, for five or fewer matches, weight, buoyancy and brands. Each row gives the
  • lookup_certifications read-onlyReturns diving certifications from Dive Kit's vetted open dataset of agencies and courses: prerequisites, equivalent courses at other agencies, depth and gas limits, notes and links. Use this when a diver asks what a cou
  • convert_units read-onlyConverts one diving figure between units: pressure (bar, psi, MPa), volume (L, ft³), depth (m, ft), temperature (°C, °F, K), weight (kg, lb) and breathing rate (L/min, ft³/min, bar/min, psi/min). Use this when a diver gi
  • gas_usage read-onlyReturns the gas one open-circuit cylinder spends over a planned profile: per segment the gas used (volume and pressure), what is left, the runtime and a status, plus the reserve, the turn pressure and the first segment t
  • mix_result read-onlyReturns the mix and pressure a cylinder ends with after gases are added in order: each addition's pressure and mix before and after, the cooling step, and the final O₂ %, He % and pressure. Use this when a diver or blend
  • plan_blend read-onlyReturns a partial-pressure blending plan from what a cylinder holds to a target mix and pressure: bleed, helium, oxygen and top-up steps with the gauge pressure to stop at, the mix after each step, the cooling step, the
  • blend_continuous read-onlyReturns the settings for continuous-flow blending through a compressor intake: each feed gas's share of the intake flow, the analyzer readings to aim for after the first injection and at the end, and the pressure to blee
  • decant read-onlyReturns what happens when two cylinders are joined with a transfill whip: the pressure both settle to, each cylinder's pressure and mix afterwards, and how much gas moved. With a target mix it also returns where to close
  • rmv_sac read-onlyReturns the gas consumption rate computed from a logged dive's cylinder pressures: RMV (surface litres a minute, what plan_dive and gas_usage take) and SAC (pressure drop a minute on that cylinder), overall and per segme
  • buoyancy_check read-onlyReturns a weighting check for one rig: how much lead to add or remove to be neutral at the end of the dive, the net buoyancy at the start (full cylinders at the target depth) and the end (near-empty cylinders at 3 m), wh
  • lookup_references read-onlyReturns vetted references from Dive Kit's open references dataset, with links. Use this when a diver asks for a source. Call it before answering any question about deco theory, physiology, gas limits, blending practice,

Connect it

Claude Code
claude mcp add --transport http dive-kit https://api.divekit.app/mcp
Claude.ai / ChatGPT
Settings → Connectors → Add custom connector
URL: https://api.divekit.app/mcp
Cursor (~/.cursor/mcp.json)
{
  "mcpServers": {
    "dive-kit": {
      "url": "https://api.divekit.app/mcp"
    }
  }
}
VS Code (.vscode/mcp.json)
{
  "servers": {
    "dive-kit": {
      "type": "http",
      "url": "https://api.divekit.app/mcp"
    }
  }
}

Questions

What does Dive Kit do?

Experimental. Plan scuba decompression dives, gas blends and gas use with Dive Kit. Reference only. It exposes 18 tools to AI assistants.

What tools does Dive Kit provide?

18 tools, including plan_dive, find_max_bottom_time, check_no_deco, read_share_link, gas_specs, best_mix, get_guide, lookup_cylinders, lookup_certifications, convert_units, gas_usage, mix_result….

How do I connect Dive Kit to Claude, ChatGPT or Cursor?

Add the remote MCP endpoint https://api.divekit.app/mcp as a custom connector or MCP server. Copy-paste setup is on this page.

Does Dive Kit require an account or API key?

No sign-in was needed to list its tools. Individual tools may still need an account or API key.

Is Dive Kit online?

As of 2026-11-19 our probe found it online. It answered 100% of our last 3 checks.

Who publishes Dive Kit?

divekit.app. The official MCP Registry verified that the publisher controls this domain before accepting the listing.

Similar in Other