Aave MCP
OnlineOfficialOfficial Aave MCP for V3 and V4 markets, positions, governance, and transaction preparation.
What it can do: 56 tools
get_chainsread-onlyList chains Aave supports, on v3, v4, or both. A chain carrying 'notServed': true is one this API holds no market on: every market, position and rewards read comes back empty for it, and that emptiness says nothing aboutget_marketsread-onlyList Aave markets/reserves (symbol, APY, caps, liquidity) on v3, v4, or both. Chain coverage: omit chainId and every response states the chains it read as 'chainsCovered', plus 'chainsNotCovered' when it read fewer thanget_emode_categoriesread-onlyv3 only. eMode groups correlated assets (ETH-correlated, stablecoins) so they borrow against each other at a higher LTV, raising borrowing power at the cost of restricting which assets the position may hold. Returns eachget_user_positionsread-onlyA wallet's Aave positions (supplies and borrows) on v3, v4, or both. Omit chainId and both versions cover every chain they serve, stating which under 'chainsCovered'; there is no need to loop over chains yourself. 'chainget_position_itemsread-onlyv4 only. The individual supplies or borrows inside one v4 spoke: principal, accrued interest and what is withdrawable right now, per item, which the per-spoke aggregate from get_user_positions cannot show. Each item's poget_user_summaryread-onlyA wallet's aggregate position and health factor. Omit chainId and both versions cover every chain they serve, stating which under 'chainsCovered'; there is no need to loop over chains yourself. 'chainsNotServed', when prget_transaction_processedread-onlyv4 only. After sending a transaction, ask whether the Aave API has processed it. Use this instead of sleeping or polling an RPC: the API lags the chain, and prepare_action will not issue a dependent follow-up (the supplyget_reserve_detailsread-onlyDeep detail for a single reserve (rates, caps, risk parameters, utilisation, the interest-rate curve, token addresses) on v3 or v4. Every rate and percentage is a percent ('3.32' means 3.32%), named with a Pct suffix. Onget_apy_historyread-onlyHistorical supply or borrow APY for a reserve over time, on v3 or v4. Returns a time-series of {date, apyPct}, where apyPct is a percent ('3.32' means 3.32%). Each point is an average over its sampling interval, and theget_user_activityread-onlyA wallet's Aave transaction history (supply, borrow, repay, withdraw, collateral changes) on v3, v4, or both. Most recent first. v4 covers every chain; v3 reads one market on one chain at a time, because upstream paginatget_protocol_historyread-onlyv4 only. Aave v4 protocol-wide history: market size, total borrows and available liquidity per sample over a window. Omit chainId to cover every supported v4 chain. Use this for 'is the protocol growing', not for one walget_user_summary_historyread-onlyv4 only. How one wallet's net worth, supplied, debt and health factor moved over a window on Aave v4. Use it to answer 'how has my position changed' or to see how close to liquidation a wallet has been. Omit chainId to cget_hubsread-onlyv4 only. Aave v4 hubs: a hub holds the liquidity and global accounting that user-facing spokes draw from. Returns each hub's hubId, address, chain and totals. Pass a hubId to get_hub_assets for the assets it carries. Omiget_hub_assetsread-onlyv4 only. The assets held by one Aave v4 hub, with hub-wide supplied and borrowed totals, rates and utilisation. Get hubId from get_hubs (or the hubAddress on get_reserve_details). This is hub-level accounting; for what aget_market_historyread-onlyv4 only. Deposits, borrows, available liquidity and utilisation over a window, for one hub or one spoke. Pick the layer deliberately: a hub is the liquidity itself and answers 'is this market growing', a spoke is one venget_asset_historyread-onlyv4 only. One asset across every v4 reserve that holds it: 'price' is its oracle price per sample, 'supply' and 'borrow' are the amounts plus the APY spread across those reserves (averageApyPct with the highest and lowestget_reserve_holdersread-onlyv4 only. The biggest wallets supplying or borrowing one v4 reserve, largest first, for questions about concentration: whether one address is most of a reserve's liquidity, or most of its debt. The token is named once forget_interest_rate_modelread-onlyv4 only. The rate curve for one hub asset: borrow and supply APY at each level of utilisation, as points along the curve the protocol actually uses. This explains a rate rather than reporting it - where the kink sits, hoget_wallet_balancesread-onlyv4 only. The tokens a wallet actually holds that v4 can take, per token and summed across chains, with 'perChain' saying where each sits, plus the best supply APY and lowest borrow APY the protocol currently offers on thget_risk_premiumread-onlyv4 only. The per-collateral breakdown of one position's risk premium: how much of the position each token is, and the weight the protocol charges for it. 'currentRiskPremiumWeightPct' is the weight in force now and 'lateget_spoke_configsread-onlyv4 only. Per-asset limits for one (hub, spoke) pair: supply and borrow caps, whether the asset is active there, whether it is halted, and the risk premium threshold. Read it before sizing a large position, because a capget_multichain_assetread-onlyv4 only. One asset across every v4 chain at once, by symbol: what is supplied and borrowed on each, the rate on each, and a summary naming the best supply rate and the lowest borrow rate anywhere. This is the tool for 'wprepare_liquidationread-onlyBuild an unsigned transaction to liquidate an unhealthy position: repay part of someone else's debt and receive their collateral plus the liquidation bonus. Only viable while that position's health factor is below 1 (cheprepare_set_emoderead-onlyv3 only. Build an unsigned transaction to switch a wallet's Aave v3 eMode category. eMode groups correlated assets (ETH-correlated, stablecoins) so they borrow against each other at a higher LTV, raising borrowing powerprepare_actionread-onlyBuild an unsigned transaction to supply, borrow, withdraw, or repay on Aave (v3 or v4). Returns an execution plan (a transaction to sign, or an approval step first). For a borrow or a withdraw, call preview_action firstprepare_set_collateralread-onlyBuild an unsigned transaction to change whether a supplied asset is used as collateral (v3 or v4). On v4 'enable' sets the state; on v3 it toggles the current state, and a toggle that would invert a stated 'enable' is repreview_actionread-onlySimulate a supply/borrow/withdraw/repay against a wallet's position WITHOUT executing, on v3 or v4 - or, v4 only, a quoted order that moves a position: a leverage, a position swap or a repay-with-supply. Always do this bget_swappable_tokensread-onlyNo version argument: token swaps are protocol-agnostic and run on the v4 backend, so they cover the chains that backend serves rather than every chain Aave has a market on. Call this before get_swap_quote to see where aget_swap_quoteread-onlyNo version argument: token swaps are protocol-agnostic and run on the v4 backend, so the chains and tokens they cover are that backend's and not every chain Aave holds a market on - a chain it does not serve is rejectedget_position_swap_quoteread-onlyv4 only. Quote swapping one Aave v4 position for another, atomically and without leaving the protocol: kind=supply swaps collateral for a different collateral asset, kind=borrow swaps one debt for another. Both sides areget_repay_with_supply_quoteread-onlyv4 only. Quote paying down a borrow using supplied collateral, atomically and without the funds leaving Aave. 'debtPosition' is the borrow to reduce, a positionItemId from get_position_items with side=borrow whose 'quotaget_leverage_quoteread-onlyv4 only. Quote opening or increasing a leveraged position in one atomic order: the debt reserve is flash-loaned, swapped into the collateral reserve and supplied, and the debt is drawn against it to repay the flash loan.prepare_orderread-onlyNo version argument: every order runs on the v4 backend. One prepare for every product - a token swap, position swap, repay-with-supply or leverage quoteId all come here. Which optional arguments apply is decided by thesubmit_signed_orderNo version argument: every order runs on the v4 backend. Relay an order the user already signed (quoteId + signature from prepare_order's PreparedOrder). State-changing: this posts the order. The server never signs.prepare_cancel_orderread-onlyNo version argument. From an orderId, return the EIP-712 cancellation for the user to sign; cancel_order relays the result. This is the gasless route for an intent order; an order that went on chain (a native-token sell)cancel_orderNo version argument. Cancel an open order. Two routes: pass 'signature' (signed over what prepare_cancel_order returned) to relay a gasless cancellation - state-changing, and the route an intent order takes; omit 'signatget_order_statusread-onlyNo version argument. Status of an order by id: open, pending signature, fulfilled, cancelled or expired, with the operation it performs and an explorer link. 'order' comes back null when the API cannot see that id, whichget_pending_ordersread-onlyNo version argument: orders run on the v4 backend, so this covers the chains that backend serves and names them under 'chainsCovered'; a chain under 'chainsNotCovered' could not be read and is worth asking about again. Aget_user_rewardsread-onlyA wallet's claimable Aave rewards on v3, v4, or both. Covers incentive programmes distributed through Merit as well as the protocol's own, so a GHO or sGHO incentive shows up here rather than anywhere separate. Omit chaiprepare_claim_rewardsread-onlyv4 only. Build an unsigned transaction to claim a wallet's V4 rewards. If 'ids' is omitted, claims everything currently claimable. Non-custodial. There is no v3 equivalent because a v3 claim needs no second call: get_use
…and 16 more.
Connect it
claude mcp add --transport http aave-mcp https://mcp.aave.comSettings → Connectors → Add custom connector
URL: https://mcp.aave.com{
"mcpServers": {
"aave-mcp": {
"url": "https://mcp.aave.com"
}
}
}{
"servers": {
"aave-mcp": {
"type": "http",
"url": "https://mcp.aave.com"
}
}
}Questions
What does Aave MCP do?
Official Aave MCP for V3 and V4 markets, positions, governance, and transaction preparation. It exposes 56 tools to AI assistants.
What tools does Aave MCP provide?
56 tools, including get_chains, get_markets, get_emode_categories, get_user_positions, get_position_items, get_user_summary, get_transaction_processed, get_reserve_details, get_apy_history, get_user_activity, get_protocol_history, get_user_summary_history….
How do I connect Aave MCP to Claude, ChatGPT or Cursor?
Add the remote MCP endpoint https://mcp.aave.com as a custom connector or MCP server. Copy-paste setup is on this page.
Does Aave MCP require an account or API key?
No sign-in was needed to list its tools. Individual tools may still need an account or API key.
Is Aave MCP online?
As of 2026-11-19 our probe found it online. It answered 100% of our last 3 checks.
Who publishes Aave MCP?
aave.com. The official MCP Registry verified that the publisher controls this domain before accepting the listing.
Similar in E-commerce & Shopping
-
Autodesk Product Help MCPOnlineOfficialPopularNew
Read official Autodesk documentation for 110+ products. No key required.
-
GlanceAI Fashion MCPOnline · sign-in requiredOfficialPopular
Fashion product discovery and virtual try-on via the Glance catalog
-
Plati.MarketOnlineOfficial
Search the plati.market (Digiseller) catalogue and fetch product details with seller info.
-
LongbridgeOnline · sign-in requiredOfficial
US/HK markets — 163 tools: quotes, options, orders, fundamentals, screener, IPO, alerts, DCA & grid
-
IcecatOnlineOfficial
Retrieve product specifications and technical details from Icecat's database
-
Avalara Cross-BorderOnline · sign-in requiredOfficial
Cross-border duty-rate and Trade & Tariff content lookups with product compliance and restrictions