Agents Index

Future Micro Mold Lab

OnlineNew

Scientific-molding calculators: viscosity curve, gate seal, cavity balance, Cpk and gage R&R.

Visit publisherConnectJSON

What it can do: 11 tools

  • viscosity_curve read-onlyFind the optimal injection velocity from a velocity / peak-pressure sweep. Computes relative viscosity (plastic pressure times fill time) against relative shear rate, locates the shear-thinning plateau, and picks a veloc
  • cavity_balance read-onlyQuantify cavity-to-cavity fill imbalance from short-shot weights. Give two or more replicate shots at a fill level and the result also says whether the variation comes from the cavities (runner and gate geometry) or from
  • pressure_drop read-onlyFind where injection pressure is consumed along the flow path. Each reading is the CUMULATIVE peak pressure needed to fill through that section — an air shot gives the nozzle figure, then sprue, runner, gate and the full
  • cosmetic_window read-onlyMap which combinations of two process parameters produce a cosmetically acceptable part, and how much room surrounds the centre. Sweep wider than you expect the window to be: a passing point on the edge of the range test
  • gate_seal read-onlyFind the hold time at which the gate freezes and part weight stops rising. Seal is the first of three consecutive weights within 0.1% of each other; the recommended production hold time adds a margin of one increment. A
  • cooling_time read-onlyFind the shortest cooling time at which a dimension has stopped changing, and the cycle seconds that come off. Supply the drawing tolerance and the rule tightens to a tenth of it. Measure each part at a consistent interv
  • process_capability read-onlyJudge whether a running process can hold a dimension inside its tolerance. Reports Cp and Cpk from within-subgroup sigma and Pp and Ppk from overall sigma — the second pair is what a customer's SPC package computes from
  • gage_rr read-onlyRate a measurement system from a crossed study: every operator measures every part, the same number of times. Two-way ANOVA per the AIAG Measurement Systems Analysis manual (4th ed.), matching Minitab's crossed gage R&R
  • get_study_protocol read-onlyReturn the full procedure for one study: what it is for, the equipment needed, the step-by-step method at the press, and what a good result looks like, so the numbers collected at the press are the ones the calculation n
  • plan_process_development read-onlyGiven the studies already run, return the full development sequence with each one marked done or outstanding, what each fixes, what it depends on, and which study to run next. The order matters: each study fixes a setpoi
  • open_study_sheet read-onlyOpen an empty data sheet for one study in an interactive card: the procedure beside a table the person fills in or pastes into, with the result computed as they type. Also returns the procedure as text and a link to the

Connect it

Claude Code
claude mcp add --transport http future-micro-mold-lab https://www.futuremicromoldllc.com/api/mcp
Claude.ai / ChatGPT
Settings → Connectors → Add custom connector
URL: https://www.futuremicromoldllc.com/api/mcp
Cursor (~/.cursor/mcp.json)
{
  "mcpServers": {
    "future-micro-mold-lab": {
      "url": "https://www.futuremicromoldllc.com/api/mcp"
    }
  }
}
VS Code (.vscode/mcp.json)
{
  "servers": {
    "future-micro-mold-lab": {
      "type": "http",
      "url": "https://www.futuremicromoldllc.com/api/mcp"
    }
  }
}

Questions

What does Future Micro Mold Lab do?

Scientific-molding calculators: viscosity curve, gate seal, cavity balance, Cpk and gage R&R. It exposes 11 tools to AI assistants.

What tools does Future Micro Mold Lab provide?

11 tools, including viscosity_curve, cavity_balance, pressure_drop, cosmetic_window, gate_seal, cooling_time, process_capability, gage_rr, get_study_protocol, plan_process_development, open_study_sheet.

How do I connect Future Micro Mold Lab to Claude, ChatGPT or Cursor?

Add the remote MCP endpoint https://www.futuremicromoldllc.com/api/mcp as a custom connector or MCP server. Copy-paste setup is on this page.

Does Future Micro Mold Lab require an account or API key?

No sign-in was needed to list its tools. Individual tools may still need an account or API key.

Is Future Micro Mold Lab online?

As of 2026-11-19 our probe found it online. It answered 100% of our last 3 checks.

Who publishes Future Micro Mold Lab?

futuremicromoldllc.com. The official MCP Registry verified that the publisher controls this domain before accepting the listing.

Similar in Other