Glazecalc
OnlineCeramic glaze chemistry: unity formulas, limit checks, substitutes, cones and potters' guides.
What it can do: 34 tools
search_materialsread-onlyFinds ceramic raw materials (feldspars, clays, frits, fluxes) and, if asked, colorants in Glazecalc's library by name, alias or maker. Use it to find the exact name the other tools take.get_materialread-onlyOne material from Glazecalc's library: its oxides, loss on ignition, whether it is discontinued and what replaces it, where it is sold, hazards and the data sheet it comes from.analyze_reciperead-onlyWorks out a glaze recipe's unity (Seger) formula, oxide groups, silica to alumina ratio, fired analysis, loss on ignition and calculated thermal expansion, as the Glazecalc app does. stull says where the recipe sits on Scheck_limitsread-onlyChecks a glaze recipe for what is past a recommended limit for its firing (too much boron or alkali, too little alumina, too little or too much clay, rising expansion...) and says what the fired glaze will likely do, asconvert_cone_temperatureread-onlyConverts between a pyrometric cone and its temperature, and between °C and °F. Orton cones run 022 to 42: Glazecalc's figure, from 022 to 15, is Orton's older chart for large cones at 150 °C an hour (cone 05.5, which thaspecific_gravity_waterread-onlyWorks out a glaze slurry's specific gravity (SG) from the grams 100 mL of it weighs (or takes the SG), then, for a bucket of it and a target SG, the water to add, or to pour off after the glaze settles, as the recipe pagsuggest_substitutesread-onlyFinds the discontinued or scarce materials in a recipe and the modern ones that replace them, then suggests amounts that keep the unity formula as near as the materials allow, as the Glazecalc app does. report.closenessmatch_from_materialsread-onlyRemakes a glaze recipe from only the materials listed in "have", keeping its unity formula as near as they allow, as Match with what I have does in the Glazecalc app. report.closeness says how near the new unity formulasolve_targetread-onlyMakes a glaze recipe, in percent, from the materials given whose unity formula comes as near a target as they allow (Solve for a target in the Glazecalc app). The target is a unity formula (moles; the fluxes are scaled tblend_recipesread-onlyWorks out the test tiles of a line blend between recipes a and b (2 to 11 steps), or of a triaxial blend when c is given too (2 to 6 rows, up to 21 tiles), as the Blends page of the Glazecalc app does. Each tile is a mixvary_materialread-onlyShows what one material does to a glaze, by putting more and more of it into a base recipe (an ingredient blend or progression test: whiting 0 to 20, say, in 2 to 11 tiles). With mode "add" (the default) it goes on top ocompare_recipesread-onlyCompares two glaze recipes side by side: for each, its recipe in percent, key unity formula figures, flux ratio (R2O against RO), silica to alumina, calculated expansion, place on Stull's chart (stull), the names of thesearch_guidesread-onlySearches Glazecalc's plain-language guides for potters (glazing from first principles, making a glaze, safe mixing, safety at home with children and pets, firing a kiln, and a companion to John Britt's free glaze course,list_recipesread-onlyLists the glaze recipes saved in your Glazecalc account, newest first, optionally only those whose title or a material matches a search, or whose stated firing includes a cone or names an atmosphere or process ("which ofget_reciperead-onlyOne recipe from your account: its materials and amounts, colorants, notes, its stated firing (firedAt: the cone scale, the low and optional high cone of the claimed range, the cones the potter has test-fired, left out whlist_my_materialsread-onlyLists the materials you have saved in your own Glazecalc account (not the shared library), with their oxides.get_shelfread-onlyThe materials you marked as on hand in Glazecalc (the shelf that Match with what I have uses).match_with_what_i_haveread-onlyRemakes one of your recipes, or a recipe you give, from only the materials on your shelf, keeping its unity formula as near as they allow (Match with what I have). report.closeness says how near the new unity formula comlist_firingsread-onlyLists the firing logs saved in your Glazecalc account, newest first.get_firingread-onlyOne firing log from your account: its columns (time, temperature, cone...) and rows, and its notes.list_notesread-onlyThe notes in your Glazecalc notebook, newest first, optionally only those about one record (a recipe, material or firing log id).get_my_settingsread-onlyYour Glazecalc settings that matter when talking about glazes: region, temperature scale, cones, language, weight unit, whether lead may be suggested, the limit set recipes are checked against, the currency your prices acreate_recipeSaves a new glaze recipe in your Glazecalc account, from its base materials and amounts (the library's names, or your own materials'), with optional colorants, notes, firing band and food-surface mark. Glazecalc works ouupdate_recipeChanges one of your saved recipes (an id from list_recipes): its title, its base materials and amounts (the unity formula is worked out again), its notes, firing band or food-surface mark. Only what is given changes. Theadd_notebook_entryAdds an entry to your Glazecalc notebook (the Notebook page), with an optional title: a test result, an observation, a firing to try. With about, it is a note about one of your recipes, materials or firing logs, which liadd_my_materialSaves a material of your own in your Glazecalc account (the Materials page) from its oxide analysis in weight percent, as on a data sheet, with its loss on ignition. Recipes can then use it by name. Needs an access tokenupdate_my_materialChanges one of your own materials (an id from list_my_materials): its name, oxide analysis in weight percent, loss on ignition or notes. Only what is given changes. Recipes already saved keep their own copy of it. The maadd_to_shelfMarks materials as on hand (the shelf that Match with what I have uses), by the library's names or your own materials'. The shelf as it was is kept: undo_shelf_change puts it back. Needs an access token that can read andremove_from_shelfTakes materials off the shelf of materials on hand, by name. The materials themselves stay. The shelf as it was is kept: undo_shelf_change puts it back. Needs an access token that can read and change your records.undo_shelf_changePuts back the shelf as it was before its last change (by the website, an access token or an assistant). One step back only: a second call finds nothing to undo until the shelf changes again. Needs an access token that camove_to_trashMoves one of your recipes, materials, notebook entries or firing logs to the Trash, as removing it on the website does. It can be put back from the Trash on the website for 30 days; nothing is deleted for good. A token mcreate_firing_logSaves a new firing log in your Glazecalc account (the Firing page): its title, the day, the kiln, the columns kept (time, temperature, cone, atmosphere, comments...) and a row for each reading, as the person dictated theadd_firing_rowsAdds rows to the end of one of your firing logs (an id from list_firings), in the log's own columns (get_firing gives them): the readings dictated during a firing. The rows already there stay as they are, and the log aslink_firingLinks one of your recipes to a firing log it went through, as the recipe page does, and sets what came of it there: the result in the person's words (at most 500 characters), and the cone and atmosphere when they differ
Connect it
claude mcp add --transport http glazecalc https://glazecalcapp.com/mcpSettings → Connectors → Add custom connector
URL: https://glazecalcapp.com/mcp{
"mcpServers": {
"glazecalc": {
"url": "https://glazecalcapp.com/mcp"
}
}
}{
"servers": {
"glazecalc": {
"type": "http",
"url": "https://glazecalcapp.com/mcp"
}
}
}Questions
What does Glazecalc do?
Ceramic glaze chemistry: unity formulas, limit checks, substitutes, cones and potters' guides. It exposes 34 tools to AI assistants.
What tools does Glazecalc provide?
34 tools, including search_materials, get_material, analyze_recipe, check_limits, convert_cone_temperature, specific_gravity_water, suggest_substitutes, match_from_materials, solve_target, blend_recipes, vary_material, compare_recipes….
How do I connect Glazecalc to Claude, ChatGPT or Cursor?
Add the remote MCP endpoint https://glazecalcapp.com/mcp as a custom connector or MCP server. Copy-paste setup is on this page.
Does Glazecalc require an account or API key?
No sign-in was needed to list its tools. Individual tools may still need an account or API key.
Is Glazecalc online?
As of 2026-11-19 our probe found it online. It answered 100% of our last 3 checks.
Who publishes Glazecalc?
glazecalcapp.com. The official MCP Registry verified that the publisher controls this domain before accepting the listing.
Similar in Productivity & Docs
-
Microsoft Learn MCPOnlineOfficialPopular
Official Microsoft Learn MCP Server – real-time, trusted docs & code samples for AI and LLMs.
-
Microsoft Sentinel Data ExplorationOnline · sign-in requiredOfficialPopular
Find relevant security data from Sentinel data lake for building effective agents. More:aka.ms/s/de
-
NVIDIA CUDA DocsOnline · sign-in requiredOfficialPopular
Search NVIDIA CUDA documentation and code samples from AI coding agents.
-
Atlassian Rovo MCP ServerOnline · sign-in requiredOfficialPopular
Connect to Atlassian Jira, Confluence, Loom, and more to search, create, and manage your work.
-
SiemensOnlineOfficialPopularNew
Search public Siemens web content, products, references, contacts, documents, podcasts and media.
-
Claude Platform DocsOnlineOfficialPopular
Search and read the Claude Platform documentation and API reference.