Agents Index

Gradient Dynamics: thermal and CFD simulation

OnlineNew

GPU CFD and conjugate heat transfer for cold plates, heat sinks, battery packs and electronics.

Visit publisherConnectJSON

What it can do: 80 tools

  • search_tools read-onlySearch all available engineering tools by name or description. Use this when a task crosses design, meshing, simulation, inference, documents or visualisation; do not limit yourself to the current UI panel. Results are f
  • get_tool_schema read-onlyRead exact schemas and permissions. Set include_definitions=false for an overview; use schema_path for individual /$defs definitions or fields.
  • get_capabilities read-onlyDiscover available engineering workflows and limits when needed. Not a prerequisite for an ordinary design request; do not use for connection troubleshooting.
  • list_projects read-onlyList engineering projects accessible to this key. These IDs are not Design Studio project IDs.
  • create_projectCreate an engineering project. Does not create a Design/Studio application project. Project-restricted keys cannot create projects.
  • import_surface_attachmentImport an already attached STL/STEP/STP/3MF using the actual file reference supplied by the chat host. Prefer this over asking the user to select that file again. The API fetches and verifies its bytes and returns a read
  • create_uploadUpload a STL/STEP/STP/3MF file from a machine where you can run commands (coding agents, CI, headless agents) without a picker and without the file passing through the model. Run the returned transfer.command there, repl
  • open_surface_uploadFallback STL/STEP/3MF file picker only for a new file when the chat host cannot hand off its attachment. Prefer import_surface_attachment for a host-provided file reference, or create_upload when you can run commands on
  • prepare_surface_uploadReuse an already verified STL with this checksum, size, filename and units in the same project, or open its authenticated file picker. Existing clients may keep these arguments. If artifact.state is ready, continue with
  • complete_surface_uploadVerify/finalize a previously uploaded STL artifact before meshing; verifies immutable size/checksum.
  • view_geometry read-onlyDefault for visualizing geometry: open a solid interactive 3D view in the Gradient Dynamics browser viewer for a generated geometry_surface or verified uploaded surface STL, including imported CAD surfaces. A static pict
  • inspect_mesh_geometry read-onlyInspect owned geometry without a mesh job or preview download; reuses saved results. Use detail=bounds for unstructured setup dimensions; a completed geometry export can provide STEP bounds without importing the assembly
  • check_geometry read-onlyCheck an owned STL or STEP with the native octree mesher before meshing: open and non-manifold edges, self-intersections, separate bodies, zero-area triangles and the part's size in metres against its declared units, eac
  • plan_mesh read-onlyDry run of an external octree mesh: send the create_mesh request (octree_prism.controls, no idempotency_key) and see the domain, sizes, boundary layer, refinement regions, predicted cells and the cores and memory it woul
  • validate_mesh read-onlyValidate structured, octree/prism or OpenFOAM meshing configuration without compute. All engines default to ±30% cell-count tolerance; leave cell_count_tolerance omitted unless the user requests another tolerance. A targ
  • create_meshMesh a design with GD Structured or GD Unstructured. Standard CGNS export by default; explicit GD CGNS, .msh or OpenFOAM exports. Memory-limited compute: usually a few minutes and under 2 credits; estimate_cost gives the
  • get_mesh_controls read-onlySearch or page granular mesh engineering controls by engine and group: surface preparation/adaptive sizing/fidelity, volume refinement and geometric wakes, prism layers/compression, connector topology, boundaries, rotati
  • validate_simulation read-onlyValidate the RANS, URANS or CHT input contract without compute. Verify mesh patches/material zones and units first. URANS requires an owned restart artifact.
  • run_simulationRun a CFD, heat-transfer or conjugate thermal (CHT) simulation to predict temperatures, pressure drop, flow and forces on a meshed design. Uses GPU compute: usually 1–15 credits and 5–60 minutes for up to 20M cells; call
  • get_solver_controls read-onlySearch/paginate all published advanced Fluxcore numerical controls, including precision, turbulence and CHT parameters. Returns canonical config.compressible_config paths, types, source revision, reference defaults and a
  • estimate_cost read-onlyHow much will this cost and how long will it take? Free and needs no account. Estimate how many credits a thermal, CFD or meshing run will use and how long it will take, before running it. Use before create_mesh or run_s
  • get_jobRead job state, progress, quality/result summary and artifact IDs, including retained diagnostics after failure. For finished geometry, mesh or published simulation results, automatically prepares/reuses one default inte
  • list_jobs read-onlyList your jobs across API keys, MCP connections and Design, without requiring a project. Optional project and type/status/source/date filters; organization view requires an admin. Includes browser links. Preserve job IDs
  • list_activity read-onlyList engineering jobs, durable preparations and meaningful synchronous operations across your credentials. Filter a workflow or study to follow related work. Read-only; never retries compute. Each entry has a browser lin
  • get_job_events read-onlyRead incremental job progress/events using the returned cursor, including execution, diagnostic evidence, failure and cancellation outcomes. Check these with get_job and owned summaries even after failed verification; re
  • get_operation read-onlyContinue a pending file import, geometry inspection or visualization preparation using its operation_id. Poll at least the returned retry_after_seconds apart. On success, result contains the ready artifact, inspection or
  • cancel_jobRequest cancellation of a specific owned job. Already running provider work may continue until cancellation is confirmed; polling timeout does not cancel work.
  • review_jobAccept or discard an existing verified mesh awaiting_decision because its achieved cell count missed the requested range. Report actual count, requested range and quality first; act only on the user's decision or explici
  • prepare_job_viewerPrepare or reopen a finished geometry, verified mesh candidate or published simulation result in its default interactive 3D browser viewer with orbit/pan/zoom. get_job normally does this automatically; PNG snapshots and
  • view_meshOpen the saved mesh in the Gradient Dynamics interactive 3D Y-up browser: body-focused wind-tunnel view, Body/Tunnel/All presets, exact cell edges, boundary colours, quality metrics, probes and true 2D slice controls. Us
  • view_mesh_sectionShow a 2D cross-section of actual volume-cell edges cut from a completed or verified awaiting_decision mesh_cgns artifact. Use this for requested mesh cross-sections, not geometry clipping. Sections and PNGs supplement v
  • view_simulation_resultPrepare an interactive Y-up browser view of an integrity-verified published simulation_result: VTU/FluxCore CGNS volume or VTP boundary. For a generic FluxCore pressure/velocity view, select field_names=[p,velocity_magni
  • list_artifacts read-onlyList immutable artifact metadata for an accessible project, optionally restricted to a job. Geometry, mesh, summary and solution artifacts have distinct kinds.
  • get_artifact read-onlyInspect artifact kind, units, checksum, lineage and mesh metadata before using it downstream.
  • read_artifact_summary read-onlyRead design.json (geometry_design), its outputs and mesh requirements, mesh boundaries/quality or numerical results directly inside MCP. Use this to understand a design before meshing or report saved simulation residuals
  • get_artifact_download read-onlyGet a temporary download for a requested file export. For a generated mesh use the primary artifact_id in get_job.mesh_exports (Standard CGNS by default); mesh_cgns is the native Fluxcore/Studio artifact. With command ac
  • list_templates read-onlyList geometry families/templates with units and STEP capability. Use get_template for parameter bounds and output names before creating a design.
  • get_template read-onlyGet one template's parameters, defaults, units, output names and exact STEP capability. Never infer dimensions or unsupported BRep export.
  • create_geometryBuild CAD (STL, and exact STEP where supported) for a cooling or flow design from a template or design document. CPU job, not charged: usually under a minute for a part, several minutes for a detailed assembly. To test p
  • create_design_previewCreate a template concept and display it in interactive 3D. Preferred for a quick initial design: creates a project if omitted, submits one durable geometry job and waits briefly for its viewer. No account check or full

…and 40 more.

Connect it

Claude Code
claude mcp add --transport http gradient-dynamics-thermal-and-cfd-simula https://api.gradient-dynamics.com/mcp
Claude.ai / ChatGPT
Settings → Connectors → Add custom connector
URL: https://api.gradient-dynamics.com/mcp
Cursor (~/.cursor/mcp.json)
{
  "mcpServers": {
    "gradient-dynamics-thermal-and-cfd-simula": {
      "url": "https://api.gradient-dynamics.com/mcp"
    }
  }
}
VS Code (.vscode/mcp.json)
{
  "servers": {
    "gradient-dynamics-thermal-and-cfd-simula": {
      "type": "http",
      "url": "https://api.gradient-dynamics.com/mcp"
    }
  }
}

Questions

What does Gradient Dynamics: thermal and CFD simulation do?

GPU CFD and conjugate heat transfer for cold plates, heat sinks, battery packs and electronics. It exposes 80 tools to AI assistants.

What tools does Gradient Dynamics: thermal and CFD simulation provide?

80 tools, including search_tools, get_tool_schema, get_capabilities, list_projects, create_project, import_surface_attachment, create_upload, open_surface_upload, prepare_surface_upload, complete_surface_upload, view_geometry, inspect_mesh_geometry….

How do I connect Gradient Dynamics: thermal and CFD simulation to Claude, ChatGPT or Cursor?

Add the remote MCP endpoint https://api.gradient-dynamics.com/mcp as a custom connector or MCP server. Copy-paste setup is on this page.

Does Gradient Dynamics: thermal and CFD simulation require an account or API key?

No sign-in was needed to list its tools. Individual tools may still need an account or API key.

Is Gradient Dynamics: thermal and CFD simulation online?

As of 2026-11-19 our probe found it online. It answered 100% of our last 3 checks.

Who publishes Gradient Dynamics: thermal and CFD simulation?

gradient-dynamics.com. The official MCP Registry verified that the publisher controls this domain before accepting the listing.

Similar in Design & UI