Agents Index

Picodev Lab

OnlineNew

Arduino benches simulated in the browser: sessions, sketch push, simulation, tests, challenges.

Visit publisherConnectJSON

What it can do: 23 tools

  • decode_capture read-onlyDecode a ready logic capture of the session (browser or bench). protocol "uart" with channels {rx} and options {baud (300-1000000, 9600), bits (5-9, 8), parity (none, even, odd), stop (1, 2), invert (false)}; "spi" w
  • list_setups read-onlyThe setups: status available (open_session works) or soon (listed, cannot be opened yet), their modes (free, challenge) and their benches by kind (status open, or soon: not offered yet).
  • open_sessionCreate a session (mode: free or challenge). Give open_url to the human: nothing simulates until they open it in their browser.
  • push_to_editorReplace the code in the human's browser and, if run, compile it in the lab's cloud and start it. The fallback of push_program: use it only when the toolchain to compile locally is missing (no arduino-cli, core or lib
  • push_programSend a program compiled on the visitor's machine (Intel HEX text, 48 KiB at most, e.g. arduino-cli's <sketch>.ino.hex) to the human's browser, which loads it in the simulator without compiling and, if run, starts it.
  • read_simulation read-onlyLast state (with circuit, the browser's components and wires), last compilation and the events after since_ms (2000 at most). `serial` is the full serial output of the current run (up to 16 KiB), reset at each compil
  • set_visibilityChange the visibility (private, link, public). Returns the viewer link; current viewers are disconnected.
  • queue_joinTake a place in the queue for benches of this kind (for example real or sim). The browser must be connected.
  • queue_status read-onlyThe session's place: state none, waiting (position, estimated wait eta_s) or turn (bench, end of the turn ends_at, Unix seconds).
  • queue_leaveGive back the place in the queue, or the turn if it has started.
  • close_sessionEnd the session now, as when it expires: the place or turn ends, viewers and the browser are disconnected, everything is forgotten.
  • session_status read-onlyThe session's state without its events, cheap enough to poll: browser connected (owner), visibility, current viewer link (not renewed), viewers, created_at and expires_at (Unix seconds), run (compilations so far: event t
  • submit_answerChallenge mode: propose `value` as the answer of the current level's test `test` (an answer test of the level's brief). One answer per second at most. The hub checks it and returns {test, ok}; the verdict is also sho
  • next_levelChallenge mode: move to the next level, as the bench's "Next level" button, and only when it would be offered: every test of the current level passed and a next level exists. Returns {level, levels}, the new level (i
  • capture_logicRecord every edge of the requested pins (probes of the setup sheet; by default the logic ones) for duration_ms (1 to 10 000 ms). In the browser's simulation, in simulated time; during the session's turn on a real ben
  • capture_analogSample the voltage of 1 to 4 board pins (the board's own numbers: Nano A0-A7 = 14-21, Uno A0-A5 = 14-19, Mega A0-A15 = 54-69; by default the setup's scope probes) at rate_hz (100 to 10 000) for duration_ms (1 to
  • read_capture read-onlyState of a capture (recording, ready, failed) and its kind (logic, analog). Once ready, the measures per pin and, for a logic capture, the edges [t_us, pin, v], 2000 from offset; for an analog one, rate_hz and the sa
  • read_setup read-onlyA served setup sheet (setup.json, files included; never a solution): board, components and wires (circuit), probes, levels (without their hints: hints come through read_simulation as the visitor reveals them). Plus,
  • push_circuitFree mode only: replace the circuit in the human's browser (the simulation stops). components: [{type, id, properties, x?, y?}] (the board is not a component), wires: [{id, start: {componentId, pinName}, end: {..
  • bench_snapshotDuring the session's turn on a real bench: a photo of the bench, as an image, and t_ms, the instant of the photo in ms since the start of the turn (null when unknown). One every 2 seconds.
  • spec_draft read-onlyDraft the specification of the visitor's own project with Picodev's interview: you ask the visitor, this tool says what to ask next and makes the PDF. Nothing is sent and nothing is kept. Call it with the sections writte
  • brief_submitSend Picodev the specification of the visitor's project, as a PDF, or only return its preview (send=false). sections: {id: text in simple Markdown}, ids envelope, fonctionPrincipale, fonctions, alimentation, format, envi
  • request_meetingSend Picodev a meeting request. contact: {name, email, company?, phone?}. context: the project in a few sentences (2000 characters at most): what the visitor wants to do, where they stand, what they did in the lab. avail

Connect it

Claude Code
claude mcp add --transport http picodev-lab https://lab.picodev.fr/mcp
Claude.ai / ChatGPT
Settings → Connectors → Add custom connector
URL: https://lab.picodev.fr/mcp
Cursor (~/.cursor/mcp.json)
{
  "mcpServers": {
    "picodev-lab": {
      "url": "https://lab.picodev.fr/mcp"
    }
  }
}
VS Code (.vscode/mcp.json)
{
  "servers": {
    "picodev-lab": {
      "type": "http",
      "url": "https://lab.picodev.fr/mcp"
    }
  }
}

Questions

What does Picodev Lab do?

Arduino benches simulated in the browser: sessions, sketch push, simulation, tests, challenges. It exposes 23 tools to AI assistants.

What tools does Picodev Lab provide?

23 tools, including decode_capture, list_setups, open_session, push_to_editor, push_program, read_simulation, set_visibility, queue_join, queue_status, queue_leave, close_session, session_status….

How do I connect Picodev Lab to Claude, ChatGPT or Cursor?

Add the remote MCP endpoint https://lab.picodev.fr/mcp as a custom connector or MCP server. Copy-paste setup is on this page.

Does Picodev Lab require an account or API key?

No sign-in was needed to list its tools. Individual tools may still need an account or API key.

Is Picodev Lab online?

As of 2026-11-19 our probe found it online. It answered 100% of our last 3 checks.

Who publishes Picodev Lab?

@PICODEV-SAS on GitHub. The official MCP Registry verified that the publisher controls this GitHub account before accepting the listing.

Similar in Browser Automation