Emission Factors
OnlineKeyless US grid carbon + power cost by ZIP: eGRID Scope 2, Scope 1 fuels, site ranking, clean hours
What it can do: 11 tools
lookup_emission_factorread-onlyLook up EPA eGRID electricity emission factors for a US ZIP code. Returns CO2e (kg/kWh and lb/MWh), CO2, CH4, N2O, NOx, SO2, non-baseload rate, carbon-free %, generation mix (coal/gas/nuclear/hydro/wind/solar etc.), eGRIlookup_by_coordinatesread-onlyLook up emission factors by latitude/longitude. Uses US Census Geocoder to resolve to ZIP first, then returns the same data as lookup_emission_factor. Useful when you have a facility address or lat/lon but no ZIP.lookup_batchread-onlyLook up emission factors for up to 100 ZIP codes in one call (split longer lists). Returns one compact row per ZIP - subregion, CO2e kg/kWh (location-based), residual mix (market-based), carbon-free %, utility - unless fcalculate_emissionsread-onlyCalculate Scope 2 CO2e for a facility from its ZIP and kWh, using both GHG Protocol methods: location-based (eGRID subregion rate) and market-based (Green-e residual mix applied to kWh not covered by RECs, PPAs or greenhourly_intensityread-onlyGet hourly grid carbon intensity (kg CO2e per kWh) for any US ZIP code, derived from EIA-930 hourly fuel-mix data. Data lags up to about a day (not real-time). Returns time series with per-hour fuel mix, total generationplant_emissionsread-onlyGet emissions from EPA Clean Air Markets Division (CAMD) for a specific US power plant or a state: fossil units over 25 MW reporting to the Acid Rain Program and CSAPR. Per facility returns total CO2 (short tons), grossutility_tariffread-onlyGet the actual utility-specific electricity rate (not state average) for a US ZIP code or named utility. Returns the current default tariff with effective rate ($/kWh), fixed monthly charge, tier count, TOU indicator, anelectricity_rateread-onlyGet the latest monthly average retail electricity rate ($/kWh and cents/kWh) for any US ZIP code, broken out by sector (residential, commercial, industrial, etc.). Data is state-level from EIA Form 861 - a ballpark, notcompare_sitesread-onlyCompare and rank 2-25 candidate US sites (ZIP codes) for a facility, data center or EV/flexible load on grid carbon and electricity cost in one call. Per site: eGRID CO2e kg/kWh (location-based), Green-e residual mix (macleanest_hoursread-onlyFind the cleanest (lowest grid carbon) contiguous window of N hours in the day to run a flexible load (batch jobs, EV charging, pumping, HVAC pre-cooling) at a US ZIP code or balancing authority. Based on the hour-of-daycalculate_fuel_emissionsread-onlyCalculate Scope 1 stationary-combustion emissions (CO2, CH4, N2O and CO2e) for fuels burned on site, using the GHG Emission Factors Hub 2026 (Cornerstone, successor to EPA's Hub; IPCC AR6 GWPs) by default, or EPA's 2025
Connect it
claude mcp add --transport http emission-factors https://emission-factors.com/mcpSettings → Connectors → Add custom connector
URL: https://emission-factors.com/mcp{
"mcpServers": {
"emission-factors": {
"url": "https://emission-factors.com/mcp"
}
}
}{
"servers": {
"emission-factors": {
"type": "http",
"url": "https://emission-factors.com/mcp"
}
}
}Questions
What does Emission Factors do?
Keyless US grid carbon + power cost by ZIP: eGRID Scope 2, Scope 1 fuels, site ranking, clean hours It exposes 11 tools to AI assistants.
What tools does Emission Factors provide?
11 tools, including lookup_emission_factor, lookup_by_coordinates, lookup_batch, calculate_emissions, hourly_intensity, plant_emissions, utility_tariff, electricity_rate, compare_sites, cleanest_hours, calculate_fuel_emissions.
How do I connect Emission Factors to Claude, ChatGPT or Cursor?
Add the remote MCP endpoint https://emission-factors.com/mcp as a custom connector or MCP server. Copy-paste setup is on this page.
Does Emission Factors require an account or API key?
No sign-in was needed to list its tools. Individual tools may still need an account or API key.
Is Emission Factors online?
As of 2026-11-19 our probe found it online. It answered 100% of our last 3 checks.
Who publishes Emission Factors?
@rozetyp on GitHub. The official MCP Registry verified that the publisher controls this GitHub account before accepting the listing.
Similar in Other
-
Google MemorystoreOnlineOfficialPopular
Provides tools to manage Memorystore for Valkey instances and backups.
-
FiverrOnlineOfficialPopularNew
Find and hire freelancers
-
ThousandEyes MCPOnlineOfficialPopular
ThousandEyes MCP Server for network intelligence: outages, anomalies, alerts, events, and tests.
-
Moot (now Moyik)Online · sign-in requiredOfficialPopularNew
Renamed to Moyik: use com.moyik/moyik. Read your spaces, brief your avatar, speak for your seat.
-
LovableOnline · sign-in requiredOfficialPopular
Official MCP server for Lovable, the AI-powered full-stack app builder.
-
WebshareOnline · sign-in requiredOfficialPopular
Manage your Webshare proxies, usage, plans and billing. Sign in with OAuth, no API key.