Engineering
Online27 engineering compliance and calculation tools for the built environment (UK, EU, UAE).
What it can do: 27 tools
calculate_pueCalculate Power Usage Effectiveness (PUE) for a data centre or server room. Returns PUE score, efficiency rating, annual cost estimate, and engineering recommendations.check_nis2_readinessAssess NIS2 Directive (EU 2022/2555) compliance readiness. Returns compliance score (0-18), maturity level, estimated fine exposure, and prioritised remediation actions.assess_epbd_scoreAssess EU EPBD (2024) compliance. Returns compliance score, renovation cost estimate, deadline pressure, and priority retrofit measures.estimate_cooling_loadEstimate cooling load using CIBSE Guide B2 / ASHRAE methodology. Returns required capacity, installed capacity with redundancy, system recommendation, and annual energy.check_uae_bim_complianceCheck UAE BIM mandate applicability (Dubai Circular 196, Abu Dhabi DMT, Sharjah). Returns mandate status, compliance score, required LOD, and submission checklist.check_uae_cybersecurityAssess UAE cybersecurity regulatory compliance (NESA IAS, Dubai ISR, CBUAE, TDRA). Returns applicable framework, compliance score, critical gaps, and mandatory controls.check_grid_feasibility_uaeAssess UAE grid connection feasibility (DEWA/ADDC/SEWA/FEWA). Returns feasibility score, connection timeline, recommended voltage, substation requirement, and next steps.get_technical_dd_quoteGenerate an indicative Technical Due Diligence (TDD) fee estimate. Returns preliminary and full DD fee ranges (GBP), turnaround days, and contact CTA.calculate_carbonCalculate operational + embodied carbon and net-zero gap (CIBSE TM65 / RICS WLCA). Returns carbon intensity, benchmark, and prioritised reduction measures with payback.thermal_loadThermal Load Estimator for data centres / critical facilities. Returns total heat load, cooling capacity, units, airflow, chiller size, PUE estimate, power density, and a CRAC/CRAH/DLC/immersion comparison.roi_calculatorEngineering ROI calculator. Returns current manual cost, annual saving, net benefit, ROI %, payback months, 3-year NPV and a verdict.building_carbon_footprintBuilding carbon footprint (Scope 1/2/3) with CRREM stranding check and embodied carbon. Returns per-scope tCO2e, intensity, CRREM compliance, net-zero gap and priority actions.building_readinessBuilding Readiness assessment for change-of-use / conversion. Returns a 0-100 readiness score, project complexity, four domain scores (structural, MEP, compliance, digital/BIM) with RAG, and recommendations.eurocode_beam_designerPreliminary Eurocode beam design (steel EC3 / composite / reinforced concrete EC2). Selects a section, computes ULS bending & shear utilisation, SLS deflection, and fire protection. Indicative, not a stamped design.eurocode_column_checkerEurocode axial column buckling check (steel EC3 6.3.1 flexural buckling / RC EC2 5.8 simplified). Returns Ncr, non-dimensional slenderness, reduction factor chi, NRd and utilisation. Indicative, not a stamped design.eu_cost_benchmarkingParametric construction cost benchmark across UK/EU/GCC by country, project type, specification, procurement, programme and BIM. Returns per-m2 and total cost ranges plus a cost breakdown. Indicative parametric estimate,dgnb_bim_readinessDGNB certification pre-score and BIM (ISO 19650) maturity self-assessment from a 20-question checklist. Returns pre-score, achievable certification level, BIM level, domain breakdown and prioritised gaps. Not a formal DGcontractor_vettingNIS2 / EPBD contractor vetting score from a 12-question checklist across financial, technical, cyber (NIS2) and energy (EPBD) categories. Flags blocking (critical) failures and returns recommended additional checks. Notdigital_renovation_passportEPBD-style staged digital renovation passport: 3-phase roadmap (quick wins, system upgrades, deep renovation) with cost ranges, energy savings and EPC trajectory from current EPC, floor area and heating type. Indicative.uk_planning_checkerUK permitted-development (GPDO 2015, England) rules engine for extensions, loft conversions and change of use. Returns a verdict (likely_pd / requires_permission / complex), applicable PD class, conditions and flags (lispart_s_evUK Approved Document S 2021 electric-vehicle charge-point requirement calculator for new build and major renovation, residential and non-residential. Returns required charge points, cable routes (1-in-5 for non-residentipart_o_overheatingUK Approved Document O 2021 simplified-method overheating check for new residential: tests maximum glazing area (by orientation, risk zone, cross vs single aspect) and minimum free ventilation area. Returns pass/fail andmees_checkerEngland & Wales Minimum Energy Efficiency Standard (MEES) check for private rented property. Tests against the in-force EPC E minimum (domestic and non-domestic) and surfaces the PROPOSED (not yet law) EPC C / 2030 uplifheatpump_heatlossDomestic whole-dwelling fabric + ventilation heat-loss estimate for heat pump sizing (BS EN 12831 / MCS), from floor area, storeys, age band, location and glazing. Returns design heat loss (kW), recommended heat pump outeed_datacentre_packEU Energy Efficiency Directive data-centre reporting pack (Dir (EU) 2023/1791 Art.12 + Del. Reg (EU) 2024/1364). Determines reporting scope (IT power >= 500 kW) and computes the mandated KPIs PUE, WUE, ERF and REF. Note:uae_climate_ghgUAE Scope 1 + Scope 2 GHG estimate from electricity and gas use, with emirate-specific grid emission factors (Dubai/Abu Dhabi/national) and the Federal Decree-Law No. 11 of 2024 mandatory-reporting context. Grid factorssap_sbem_precheckUK SAP 10.3 / SBEM EPC precheck. Maps a known SAP rating (1-100) to its EPC band, and/or computes annual CO2 and primary energy from fuel consumption using validated SAP 10 fuel factors. The official EPC band is cost-bas
Connect it
claude mcp add --transport http engineering https://api.novtriq.tech/mcpSettings → Connectors → Add custom connector
URL: https://api.novtriq.tech/mcp{
"mcpServers": {
"engineering": {
"url": "https://api.novtriq.tech/mcp"
}
}
}{
"servers": {
"engineering": {
"type": "http",
"url": "https://api.novtriq.tech/mcp"
}
}
}Questions
What does Engineering do?
27 engineering compliance and calculation tools for the built environment (UK, EU, UAE). It exposes 27 tools to AI assistants.
What tools does Engineering provide?
27 tools, including calculate_pue, check_nis2_readiness, assess_epbd_score, estimate_cooling_load, check_uae_bim_compliance, check_uae_cybersecurity, check_grid_feasibility_uae, get_technical_dd_quote, calculate_carbon, thermal_load, roi_calculator, building_carbon_footprint….
How do I connect Engineering to Claude, ChatGPT or Cursor?
Add the remote MCP endpoint https://api.novtriq.tech/mcp as a custom connector or MCP server. Copy-paste setup is on this page.
Does Engineering require an account or API key?
No sign-in was needed to list its tools. Individual tools may still need an account or API key.
Is Engineering online?
As of 2026-11-19 our probe found it online. It answered 100% of our last 3 checks.
Who publishes Engineering?
novtriq.tech. The official MCP Registry verified that the publisher controls this domain before accepting the listing.
Similar in Legal & Compliance
-
Android Management APIOnlineOfficialPopular
Remote enterprise management of Android devices and apps
-
CookieYesOnline · sign-in requiredOfficialPopularNew
Manage cookie banners, run cookie scans and check GDPR/CCPA compliance from your AI assistant.
-
ngrokOnline · sign-in requiredOfficialPopularNew
Manage ngrok from your agent: endpoints, domains, and traffic policy.
-
AltmetricOnline · sign-in requiredOfficial
MCP server for Altmetric APIs - track research attention across news, policy, social media, and more
-
eCourtsIndiaOnline · sign-in requiredOfficial
Indian court data for AI: 27.6 Cr cases, orders, cause lists, Supreme Court to tribunals, statutes
-
Syfert Legal ResearchOnlineOfficial
Verify legal citations, case treatment, quotes and whole briefs against 10.7M U.S. opinions