{"id":"com.breadboardhub/circuits","slug":"com-breadboardhub-circuits","title":"breadboardhub circuits","description":"Check, simulate and design electronic circuits, with a link to run each one live in the browser.","version":"1.0.0","publisher":{"kind":"domain","id":"breadboardhub.com","label":"breadboardhub.com","url":"https://breadboardhub.com"},"website":"https://www.breadboardhub.com","repository":"","remotes":[{"type":"streamable-http","url":"https://www.breadboardhub.com/api/mcp"}],"packages":[],"published":"2026-11-18","updated":"2026-11-18","status":"online","auth":"","latency_ms":1906,"checked":"2026-11-20","uptime":100,"checks":3,"tools":[{"name":"check_circuit","title":"Check a circuit","description":"Free and instant. Checks a CircuitJS circuit for structural problems: unknown parts, loose ends, parts with no power source, LEDs with the wrong diode model, labels on top of parts. With \"request\", also checks it contains the parts asked for (a bulb, an ammeter, a voltmeter, a switch). Returns the problems, the parts list and a link that opens the circuit running live.","read_only":true},{"name":"simulate_circuit","title":"Simulate a circuit","description":"Runs a CircuitJS circuit in a real circuit simulator until it settles and returns the voltage across and current through each part, plus faults found: a short circuit, nothing flowing, an LED over its current rating, a bulb too dim to light. Takes 10 to 30 seconds. Limited per day; an API token raises the limit.","read_only":true},{"name":"design_circuit","title":"Design a circuit","description":"Designs an electronic circuit (and an Arduino sketch, for microcontroller projects) from a plain description, such as \"a 9V battery lighting a red LED\". The design passes breadboardhub's structural checks, with one corrected attempt if needed. Returns the CircuitJS circuit, any code, the check result, a link that opens it running live, and the parts to buy with supplier links. Takes up to 2 minute","read_only":false},{"name":"edit_circuit","title":"Change a circuit","description":"Changes a CircuitJS circuit as asked in plain words, such as \"make the two resistors parallel\", \"add a voltmeter across the LED\" or \"use a 12V supply\", or answers a question about it (\"what does the 10 mH part do?\"). The changed circuit passes breadboardhub's structural checks, with one corrected attempt if needed; a change that would break the circuit is refused and the circuit is returned unchan","read_only":false},{"name":"calculate","title":"Run an electronics calculator","description":"Free and instant. Runs one of breadboardhub's electronics calculators and returns the answer, the working, and a link that opens the circuit running live. Calculators and their inputs: resistor-color-code (d1, d2, d3, exponent, tolerance); led-resistor (supplyV, ledV, currentA); voltage-divider (vin, r1, r2); rc-time-constant (ohms, farads, supplyV); ohms-law (volts, ohms); series-parallel-resisto","read_only":true},{"name":"debug_circuit","title":"Debug a real circuit","description":"Finds why a circuit someone built does not work. Takes the symptom and either a description of what was built (drawn as built, mistakes included, with the connections and any guesses listed so they can be checked) or the circuit itself. Simulates the circuit, names the likely causes, proposes a fix and simulates that too, then says whether the simulator confirms the fix, whether the circuit as dra","read_only":false},{"name":"design_chip","title":"Design a digital chip in Verilog","description":"Writes a synthesizable Verilog module and a step-by-step test for it from a plain description, such as \"a 4-bit counter with enable and reset\". Builds it with Yosys (the open-source synthesis tool) and runs the test on the built circuit, correcting it up to twice from the exact errors. \"verified\" means it built with no errors or warnings and every test step passed; the test is written by the AI to","read_only":false},{"name":"fix_chip","title":"Fix Verilog that does not build","description":"Builds Verilog with Yosys and Verilator and, if there are errors or warnings, corrects it, building it again after each change. Returns the corrected code, what is still wrong, and a link that opens it. Counts toward the daily design limit, except when the code already builds clean.","read_only":false},{"name":"explain_chip","title":"Explain Verilog","description":"Explains what a Verilog module does, in plain English: its inputs and outputs, its behaviour, and anything unusual. Counts toward the daily design limit.","read_only":true},{"name":"search_designs","title":"Search circuit designs","description":"Searches public circuit, firmware and schematic designs shared on breadboardhub. Returns names, types, tags, stars and links.","read_only":true},{"name":"get_design","title":"Get a design","description":"Gets one public design by its owner's username and the design's slug, as shown in search results and in breadboardhub design links.","read_only":true}],"server_info":{"name":"breadboardhub","title":"breadboardhub circuits","version":"1.2.0"},"category":"design","tags":["browser","developer","web-search"],"kind":"remote","source":"registry","submitted":{},"first_party":true,"domain_rank":null,"score":100,"indexable":true,"first_seen":"2026-11-18","stars":0,"badges":["new"],"sponsor":null,"page":"https://agentsindex.org/agents/com-breadboardhub-circuits/"}