{"id":"com.midasiteurope/civil-nx","slug":"com-midasiteurope-civil-nx","title":"MIDAS CIVIL NX tools (MIDAS IT Europe)","description":"Build, check and report on MIDAS CIVIL NX bridge models and design tendons, with MIDAS IT plugins.","version":"0.7.1","publisher":{"kind":"domain","id":"midasiteurope.com","label":"midasiteurope.com","url":"https://midasiteurope.com"},"website":"https://midasiteurope.com/llm","repository":"","remotes":[{"type":"streamable-http","url":"https://midasiteurope.com/mcp","headers":[{"description":"Personal token (cnx_...) from midasiteurope.com/llm. Needed to read or change a CIVIL NX model; calculation tools work without it.","value":"Bearer {token}","isSecret":true,"variables":{"token":{"description":"Your cnx_ token from midasiteurope.com/llm (free account).","isSecret":true,"placeholder":"cnx_..."}},"name":"Authorization"}]}],"packages":[],"published":"2026-11-11","updated":"2026-11-11","status":"online","auth":"","latency_ms":1172,"checked":"2026-11-19","uptime":100,"checks":3,"tools":[{"name":"auto_structure_groups","title":"Auto Structure Groups","description":"Use to group elements automatically by section, material or both. For groups by position or by construction-stage segment use stage_groups; for one group of ids you already know use civil_write_tables (GRUP). Creates one structure group per section, per material, or per section + material pair, with the Auto Structure Groups plugin's own engine: it reads every element's section and material, names","read_only":false},{"name":"auto_structure_groups_undo","title":"Undo an Auto Structure Groups run","description":"Use only to reverse a auto_structure_groups run (from its ledger); every write tool has its own undo. Reverses an auto_structure_groups run from the ledger: deletes the groups it created and puts every group it added members to back exactly as it was (from the snapshot taken just before the write). Refuses while a construction stage uses one of those groups, because deleting a group strips it from","read_only":false},{"name":"b2p_survey","title":"Beam to Plate — which beams and sections can convert","description":"Use before b2p_convert, to see which beams and sections can become a plate or solid mesh. To read a section's shape use section_read; for bar placement in a design check use ec2_describe_section or cs455_describe_section. Reads the model the way the Beam to Plate plugin (1.0.6) does and studies every section the chosen beams use, against CIVIL NX's own published properties (/ope/SECTPROP): whether","read_only":true},{"name":"b2p_convert","title":"Beam to Plate — convert beams into a plate/solid mesh","description":"Use to replace beam elements with a plate or solid mesh of their real cross-section (a detailed local model). Not for building a new deck (skew_grillage) or changing spans (bridge_reshape). Converts beam elements into a plate (or solid) mesh of their cross-section with the Beam to Plate plugin's own engine (1.0.6): every section CIVIL NX gives geometry for (rolled/fabricated steel, PSC, boxes, com","read_only":false},{"name":"b2p_undo","title":"Beam to Plate — undo a conversion","description":"Use only to reverse a b2p_convert run (from its ledger); every write tool has its own undo. Undoes a b2p_convert run from the ledger with the plugin's own Undo: removes the virtual beams, the plates/solids, the rigid links and construction-joint links, the converted loads and the nodes it made, gives the stages and boundary groups back, then puts the beams back with their beam loads, temperatures,","read_only":false},{"name":"bridge_reshape_read","title":"Bridge Reshaper — read the bridge","description":"Use before bridge_reshape, to see the existing bridge's spans, skews, alignment and levels. Read-only. Reads the open model the way the Bridge Reshaper plugin (1.0.6) does: the deck (straight, in straight pieces kinked at half-joints or piers, or curved; beam girders, girders meshed as plates, or a spine (single-line) model with its pylons, stays and piers read as substructure; any length unit), i","read_only":true},{"name":"bridge_reshape","title":"Bridge Reshaper — change spans, skews, alignment and levels","description":"Use to change the spans, support skews, alignment or deck levels of a bridge that is already in the model. For a new deck use skew_grillage; for geometry from a drawing use dxf_import. Changes the geometry of the bridge in the open model in place, with the Bridge Reshaper plugin's own engine (1.0.6): new span lengths (the deck is stretched - each span keeps its element count), a skew for each supp","read_only":false},{"name":"bridge_reshape_undo","title":"Bridge Reshaper — undo a reshape","description":"Use only to reverse a bridge_reshape run (from its ledger); every write tool has its own undo. Undoes a bridge_reshape run from the ledger with the plugin's own Undo: every row the run overwrote is written back and every row it created is removed, so the model returns exactly. Refuses on a different model, or when the model was edited since the apply (force: true undoes anyway, overwriting those e","read_only":false},{"name":"bridge_thermal_calc","title":"Bridge thermal actions (EN 1991-1-5 / CS 454 / BS 5400-2)","description":"Use for code temperature values of a bridge (EN 1991-1-5, CS 454, BS 5400-2) without touching the model. To write them use bridge_thermal_apply; for a temperature you already know use civil_loads_supports (temperature). Calculates bridge temperature actions with the Bridge Thermal Loads plugin's own engine: shade air and effective bridge temperatures, the uniform ranges ΔT_N,con / ΔT_N,exp (and be","read_only":true},{"name":"bridge_thermal_read","title":"Read the deck sections for thermal loads","description":"Use before bridge_thermal_apply, to find the deck and its sections. Read-only. Reads the open model the way the Bridge Thermal Loads plugin does: the deck from a structure group, element list or the CIVIL NX selection, grouped into sections (beams by section, plates by thickness), each with the proposed deck type, depths h and D, and its width-against-depth parts per material (read through the sha","read_only":true},{"name":"bridge_thermal_apply","title":"Write bridge temperature loads (Bridge Thermal Loads)","description":"Use to write code-derived bridge temperature load cases (EC1T_…) on the deck. For a single temperature value you already have, civil_loads_supports (temperature) is simpler. Calculates the temperature actions for the deck and writes them with the Bridge Thermal Loads plugin's writer: EC1T_Uniform_Exp/_Con (type T, element or system temperature), EC1T_Diff_Heat/_Cool (type TPG: beam section tempera","read_only":false},{"name":"bridge_thermal_undo","title":"Undo a thermal write or remove","description":"Use to reverse the latest bridge_thermal_apply or bridge_thermal_remove run. To clear every EC1T_ case whoever wrote it, use bridge_thermal_remove. Undoes the latest bridge_thermal_apply or bridge_thermal_remove run (or the run named): deletes the EC1T_ cases present now and puts back the EC1T_ cases and loads saved before that run, merged into each element's current loads so other cases are kept.","read_only":false},{"name":"bridge_thermal_remove","title":"Remove the thermal loads","description":"Use to delete every EC1T_ thermal load case, whichever run or window wrote it. To reverse one run only use bridge_thermal_undo; for other loads use civil_remove_loads. Removes what the Bridge Thermal Loads plugin writes: every load case whose name starts with EC1T_ (also named sets and ones the plugin window wrote) and all temperature loads in them, on any element. Other load cases are not touched","read_only":false},{"name":"concurrent_forces_setup","title":"Concurrent forces: what the model offers","description":"Concurrent forces, step 1: use before concurrent_forces to list the items, effects and load states the model offers. Read-only. Concurrent Force Reporter, step 1. Reads the open CIVIL NX model the way the plugin does when it connects and lists what a concurrent-forces run can use: every load case and combination (all ten LCOM tables) with how MIDAS addresses it, whether it is envelope-valued, and ","read_only":true},{"name":"concurrent_forces","title":"Concurrent forces at the governing state","description":"Use for the forces that act together with the extreme of ONE effect (e.g. My max with its concurrent N and Vz). For which load cases make up a combination use combination_contributions; for plain result rows use preview_result_table. Concurrent Force Reporter, step 2. For a set of items (elements, nodes, links), finds the load state that makes ONE key effect extreme at ONE key item (max, min or ab","read_only":true},{"name":"concurrent_forces_probe","title":"Concurrent forces: probe the result tables","description":"Use only to diagnose why concurrent_forces finds no results for a source; not a result reader. Concurrent Force Reporter diagnostics. For each result source the plugin reads (beam, truss, plate, general link, elastic link, node reaction, node displacement), asks this CIVIL NX build with one item of that kind which table token answers, the columns it returns and how they map, the output-point token","read_only":true},{"name":"cs454_lane_layout","title":"CS 454 notional lanes for a carriageway","description":"Use to lay out CS 454 notional lanes on a carriageway width, with no model. For EN 1991-2 lanes use ec_lane_layout; to write lanes and vehicles use cs454_moving_loads. Lays out CS 454 notional lanes, remaining areas, footways and strips on a carriageway cross-section with the CS454 - Moving Load Wizard's own layout engine (Table 5.9a, cl 5.10, ALL model 1 single/convoy, ALL model 2, SV/HB routes a","read_only":true},{"name":"cs454_moving_loads_read","title":"Read the model for CS 454 moving loads","description":"Use before cs454_moving_loads. For Eurocode traffic use ec_moving_loads_read. Read-only: changes nothing in the model. Call it before cs454_moving_loads to see what the CS454 - Moving Load Wizard would do. Returns: existing (the lanes, vehicles, cases and groups already in the model, each marked if an earlier cs454_moving_loads run created it); laneKindSuggestion (LINE for beams, SURFACE for plate","read_only":true},{"name":"cs454_moving_loads","title":"CS454 - Moving Load Wizard","description":"Use for UK CS 454 assessment live loading (lanes, vehicles, moving-load cases). For EN 1991-2 traffic use ec_moving_loads; to spread existing point loads into patches use point_to_patch_apply. CS 454 assessment live loading with the CS454 - Moving Load Wizard plugin's own engine: notional lanes laid out on the carriageway (line lanes on a grillage, surface lanes on a plate deck), ALL model 1/2 veh","read_only":false},{"name":"cs454_moving_loads_undo","title":"Undo a CS454 moving-load run","description":"Use only to reverse a cs454_moving_loads run (from its ledger); every write tool has its own undo. Removes the lanes, vehicles, cases, envelopes and groups a cs454_moving_loads run wrote, using the plugin's own cleanup (cases and envelopes first, bottom up, at most 100 per call): anything edited since the run, or still used by something else, is kept. Previews unless apply: true.","read_only":false},{"name":"cs454_combinations_read","title":"Read the model for CS 454 combinations","description":"Use before cs454_combinations_apply. For Eurocode use ec_combinations_read; to list or explore the combinations already in the model use combination_tree. Reads the open model the way the CS 454 Load Assessment Combinations plugin does: every static, construction-stage, settlement and moving load case with the Table A.1 action / CS 454 load model and assessment level it proposes, each tab's gate, ","read_only":true},{"name":"cs454_combinations_apply","title":"Generate and write CS 454 assessment combinations","description":"Use for the full CS 454 (UK assessment) combination set. For EN 1990 use ec_combinations_apply; for a few hand-picked combinations use civil_combinations_quick. Generates CS 454 assessment load combinations with the plugin's engine (Table A.1 γfL by combination 1–4 and limit state, adverse/relieving permanent variants, wind sub-case, ALL/SV/HB traffic with associated traffic, exclusive groups coll","read_only":false},{"name":"cs454_combinations_undo","title":"Undo a CS 454 combinations write","description":"Use only to reverse a cs454_combinations_apply run (from its ledger); every write tool has its own undo. Undoes the latest cs454_combinations_apply run (or the run named) with the plugin's cleanup: deletes the rows it wrote that still carry its names (referencing rows first), then restores every table it cleared at the original keys. Previews unless apply: true.","read_only":false},{"name":"cs455_describe_section","title":"CS 455: read a section and place its bars","description":"Step 1 of a CS 455 (UK assessment) concrete section check. For a Eurocode check use ec2_describe_section; only to read or edit a section's shape use section_read. Start here when the user shares a reinforcement drawing, photo or schedule. Read from it: cover, for each face the layers (number of bars or spacing, and Ø - mm, inches or #US sizes are all accepted), side bars, links (Ø, legs, spacing);","read_only":true},{"name":"cs455_assess","title":"CS 455 assessment of an RC beam, column, pier or pile section","description":"Use for CS 455 (UK assessment) ULS of RC beam, column, pier or pile sections. For EN 1992 use ec2_section_check; for slabs and plates use slab_assess; for stresses use stress_profile or sls_stress_check. CS 455 ULS assessment of reinforced concrete beam sections with the plugin's own engine: reads the concurrent force rows (BEAMFORCE / BEAMFORCEVBM for envelopes and moving loads, kN·m; a moving-lo","read_only":true},{"name":"cs455_export_calc_sheet","title":"CS 455 calculation sheet (Excel)","description":"Use for the CS 455 Excel calculation sheet of one element end. For EN 1992 use ec2_export_calc_sheet. The report. Assesses one element end exactly as cs455_assess and writes the plugin's reference-format calculation sheet (.xlsx: A4 pages, title block, geometry, materials, reinforcement, section properties, sagging/hogging bending, shear and torsion with live formulas and charts (for a column, pie","read_only":true},{"name":"cs_stage_summary","title":"Construction Stage Reporter — stage summary","description":"Use to list the construction stages already in the model (durations, groups activated). To create stages use construction_stages; for stage results use cs_stage_results. Reads the construction stage definition of the open CIVIL NX model with the Construction Stage Reporter plugin's engine and returns, per stage: duration and day range, the structure groups activated (with age and element count) an","read_only":true},{"name":"cs_stage_results","title":"Construction Stage Reporter — construction-stage results","description":"Use for construction-stage analysis results, stage by stage. For results that are not per stage use preview_result_table; for the Excel / PDF report use cs_stage_report. Reads construction-stage analysis results the way the Construction Stage Reporter plugin does (POST /post/TABLE in the construction-stage family, every stage in one query at its last step; stages after the analysis stopped carry t","read_only":true},{"name":"cs_stage_report","title":"Construction Stage Reporter — Excel / PDF report","description":"Use for the construction-stage report (Excel, PDF, video). For the whole-model report use model_report_export. Makes the Construction Stage Reporter plugin's own reports of the open model's construction stages and returns download links (never the file inline): the Excel workbook (summary, stage matrices for structure/boundary/load groups, group tables, stage details, composite sections, displacem","read_only":true},{"name":"culvert_preview","title":"Preview a 2D box culvert (Eurocode)","description":"Step 1 of a 2D box culvert built from inputs (Eurocode). Not for bridge decks (skew_grillage). Validates a 2D Culvert project with the plugin's own Eurocode core and returns what it would build: nodes, elements, soil springs, basic load cases (traffic unit cases), the EN 1990 Annex A2 combination counts (ULS, SLS characteristic, quasi-permanent) and the nested CIVIL NX combinations, check location","read_only":true},{"name":"culvert_build","title":"Build the culvert model in CIVIL NX","description":"Use to write the 2D culvert model after culvert_preview. Only for culverts. Writes the 2D Culvert model exactly as the plugin's Build: units, user material, sections, frame, soil springs, supports, every basic load case with its loads, and the nested EN 1990 Annex A2 combinations; then reads the loads back and fails if CIVIL NX dropped any. Into the open model only if it is empty, or into a new do","read_only":false},{"name":"culvert_build_undo","title":"Undo a culvert build","description":"Use only to reverse a culvert_build run (from its ledger); every write tool has its own undo. Deletes every row a culvert_build wrote (combinations, loads, load cases, springs, supports, groups, elements, nodes, sections, material) from the ledger's record, and puts back the model's units. A model replaced by newDocument cannot be brought back. Previews unless apply: true.","read_only":false},{"name":"culvert_analyse_and_check","title":"Analyse the culvert and run every check","description":"Use only on a culvert made by culvert_build. To analyse any other model use civil_run_analysis. On the culvert model built from the same inputs (refused if the open model's counts differ): runs the CIVIL NX analysis (unless analyse: false), reads the basic-case results (forces, reactions, displacements) and runs the plugin's checks — every Annex A2 combination and vehicle position: ULS flexure and","read_only":false},{"name":"culvert_report","title":"Culvert calculation report","description":"Use for the culvert calculation report. For a general model report use model_report_export. Runs the checks on the analysed culvert model (as culvert_analyse_and_check, without re-analysing unless analyse: true) and writes the plugin's report: format xlsx (default) = the calculation book in the MIDAS report format with result diagrams captured from CIVIL NX, pdf, or both (one run of the checks). R","read_only":true},{"name":"midas_docs_search","title":"Search the MIDAS manuals","description":"Use for how-to questions, what a CIVIL NX input means, or a MIDAS API table's fields. For valid names (material grades, section shapes) use midas_library. Searches the MIDAS help centre (support.midasuser.com), live: the CIVIL NX and GEN NX online help (every dialog: what it does, where it is in the menus, each input), the MIDAS API (MAPI) JSON manual (every db/ table, its URI, methods, JSON schem","read_only":true},{"name":"midas_docs_read","title":"Read a MIDAS manual article","description":"Use after midas_docs_search, to read one article in full. Reads one MIDAS help-centre article in full, as Markdown: headings, notes, input tables, and for the MIDAS API manual the URI, methods, JSON schema and JSON examples as code blocks. Also lists the article's images (links). Long articles come in parts: call again with nextOffset. Give the user the article's url when you rely on it. Needs no ","read_only":true},{"name":"dxf_inspect","title":"Advanced DXF Importer — inspect a drawing","description":"Use before dxf_import, to see what a DXF would create. No model needed. Reads a DXF with the Advanced DXF Importer plugin's own parser and clean-up and reports what an import would create: the file (version, encoding, entity counts, what is ignored or unsupported), its units, every layer with its entities and mapping, and the clean model — nodes, BEAM/TRUSS/PLATE elements per layer, structure grou","read_only":true},{"name":"dxf_import","title":"Advanced DXF Importer — import into CIVIL NX","description":"Use to bring geometry from a DXF drawing into the model. For a deck from parameters use skew_grillage; for nodes from a coordinate list use create_nodes. To export a DXF use model_to_dxf. Imports a DXF into the open CIVIL NX model with the Advanced DXF Importer plugin's engine: the same parse, layer mapping, clean-up and write as the plugin. Nodes and elements get new ids above the model's (existi","read_only":false},{"name":"dxf_import_undo","title":"Undo a dxf_import","description":"Use only to reverse a dxf_import run (from its ledger); every write tool has its own undo. Removes what one dxf_import created, with the plugin's own removal rules: it refuses unless the import's master group is in the open model; deletes the import's elements, then its nodes, only where they still match the fingerprint taken before writing (anything edited since is kept, and a node another elemen","read_only":false},{"name":"ec_combinations_read","title":"Read the model for Eurocode combinations","description":"Use before ec_combinations_apply. For CS 454 use cs454_combinations_read; to list or explore the combinations already in the model use combination_tree. Reads the open model the way the Eurocode Load Combinations plugin does: every static, moving (characteristic/frequent pairs), construction-stage, settlement and response-spectrum case with the action and subtype the plugin proposes, the detected ","read_only":true},{"name":"ec_combinations_apply","title":"Generate and write Eurocode load combinations","description":"Use for the full EN 1990 bridge combination set. For CS 454 use cs454_combinations_apply; for a few hand-picked combinations use civil_combinations_quick. Generates EN 1990 bridge load combinations with the Eurocode Load Combinations plugin's engine (6.10 / 6.10a+b, SLS characteristic / frequent / quasi-permanent, accidental 6.11, seismic 6.12; Annex A2 ψ by bridge type; recommended, UK or Irish a","read_only":false},{"name":"ec_combinations_undo","title":"Undo a Eurocode combinations write","description":"Use only to reverse a ec_combinations_apply run (from its ledger); every write tool has its own undo. Undoes the latest ec_combinations_apply run (or the run named) with the plugin's undo: deletes the rows it wrote that still carry its names, then restores the rows it deleted at their original keys. Previews unless apply: true.","read_only":false},{"name":"ec_lane_layout","title":"EN 1991-2 notional lanes for a carriageway","description":"Use to lay out EN 1991-2 notional lanes on a carriageway width, with no model. For CS 454 lanes use cs454_lane_layout; to write lanes and vehicles use ec_moving_loads. Lays out EN 1991-2 lanes on a carriageway cross-section with the Eurocode - Moving Load Wizard's own layout engine: Table 4.1 notional lanes and the remaining area, footways, the LM2 axle lane, the LM4 crowd lane, an LM3 special veh","read_only":true},{"name":"ec_moving_loads_read","title":"Read the model for Eurocode moving loads","description":"Use before ec_moving_loads. For CS 454 traffic use cs454_moving_loads_read. Read-only: changes nothing in the model. Call it before ec_moving_loads to see what the Eurocode - Moving Load Wizard would do. Returns: existing (the lanes, vehicles, cases and groups already in the model, each marked if an earlier ec_moving_loads run created it); laneKindSuggestion (LINE for beams, SURFACE for plates); d","read_only":true},{"name":"ec_moving_loads","title":"Eurocode - Moving Load Wizard","description":"Use for EN 1991-2 traffic loading (lanes, vehicles, moving-load cases). For UK CS 454 assessment use cs454_moving_loads; to spread existing point loads into patches use point_to_patch_apply. EN 1991-2 traffic loading with the Eurocode - Moving Load Wizard plugin's own engine: lanes laid out on the carriageway (line lanes on a grillage, surface lanes on a plate deck) for the chosen load groups gr1a","read_only":false},{"name":"ec_moving_loads_undo","title":"Undo a Eurocode moving-load run","description":"Use only to reverse a ec_moving_loads run (from its ledger); every write tool has its own undo. Removes the lanes, vehicles, cases and groups an ec_moving_loads run wrote, using the plugin's own cleanup (cases first, bottom up, at most 100 per call): anything edited since the run, or still used by something else, is kept. Previews unless apply: true.","read_only":false},{"name":"ec_wind_bridge","title":"Bridge wind loads (EN 1991-1-4 §8 or CS 454)","description":"Use for bridge deck wind values (EN 1991-1-4 or CS 454) without touching the model. To write them use ec_wind_apply. Calculates wind on a bridge deck with the Wind Load Calculator plugin's own engine (formerly Eurocode Wind Loads). code EN: EN 1991-1-4 §8 — v_b, q_p(z_e), c_sc_d, d_tot, the transverse (x), longitudinal (y) and vertical (z, at e = ±b/4) forces, wind with traffic. code CS454: CS 454","read_only":true},{"name":"ec_wind_read_deck","title":"Read the deck for wind","description":"Use before ec_wind_apply, to find the deck and its dimensions. Read-only. Reads the open model the way the Wind Load Calculator plugin does: finds the deck (or measures the elements / group given), and reports b, d, L, the soffit height, the span axis, whether the deck is beams or plates, and a structural-form guess. Read-only.","read_only":true},{"name":"ec_wind_apply","title":"Write bridge wind loads (Wind Load Calculator)","description":"Use to write code-derived wind load cases on the deck. For a wind load you already know, civil_loads_supports is simpler. Calculates wind on the deck (EN 1991-1-4 §8, or CS 454 Appendix D with code: CS454) and writes it with the Wind Load Calculator plugin's adapter: one load case per global direction (EC1W_ for EN, C454W_ for CS 454), then beam loads (beam deck) or a pressure + fascia nodal loads","read_only":false},{"name":"ec_wind_remove","title":"Remove the wind loads","description":"Use to delete the wind load cases the Wind Load Calculator wrote (EC1W_, C454W_); it is also the undo of ec_wind_apply. For other loads use civil_remove_loads. Removes what the Wind Load Calculator plugin writes: every EC1W_ and C454W_ load case, its load group, and their beam/pressure/nodal loads — whether this tool or the plugin window wrote them. Loads anyone else put on the same elements are k","read_only":false},{"name":"skew_grillage","title":"Skew Grillage Geometry Generator","description":"Use to create a new bridge deck (beam grillage or plate mesh) from spans, widths and skew. To change a deck already in the model use bridge_reshape; for geometry from a drawing use dxf_import. Generates a bridge deck (beam grillage or plate mesh) with the Skew Grillage Geometry Generator plugin's own engine: skew (0 = straight/square), unequal girders, plan curvature, multi-span, crossfall and ver","read_only":false},{"name":"skew_grillage_undo","title":"Undo a Skew Grillage run","description":"Use only to reverse a skew_grillage run (from its ledger); every write tool has its own undo. Removes the deck a skew_grillage run wrote (its elements, nodes, new structure groups and any default properties nothing else uses). Refuses while lanes, other groups or other elements still depend on it. Previews unless apply: true.","read_only":false},{"name":"combination_tree","title":"Combinations: list them, or show one's tree","description":"Use to list the model's combinations, or show one's tree of cases and factors. Read-only. To split a result into its load cases use combination_contributions; to write combinations use civil_combinations_quick or the code tools. Load Combination Contribution Analyzer, step 1. Without name: lists the model's General-tab load combinations (LCOM-GEN) with type (ADD, ENVELOPE, ABS, SRSS), constituent ","read_only":true},{"name":"combination_contributions","title":"Which load cases make up a combination's result","description":"Use to find which load cases make up a combination's result at given items. For the forces that act together with an extreme use concurrent_forces. Load Combination Contribution Analyzer, step 2. Splits one or more load combinations' results at a set of items into the load cases that produced them: for every item, output point (beam I/J and intermediate points, plate nodes and centre), component a","read_only":true},{"name":"midas_library","title":"MIDAS libraries: materials, sections, elements","description":"Use for valid names when writing tables: material standards and grades, section shapes and their dimension order, element and support rows. For how-to text and API fields use midas_docs_search. Structured reference for writing a CIVIL NX model through the API (civil_write_tables): the material standard names CIVIL NX knows (46 concrete standards), material fields per type, grades known to work, ev","read_only":true},{"name":"civil_status","title":"CIVIL NX connection and model summary","description":"Start here: checks the connection and summarises the open model. For one table's rows use civil_read_table. Checks the MAPI connection to CIVIL NX and summarises the open model: units, moving load code, row counts per table, structure/boundary/load group names, static load cases, stages, general combinations, and the most recent runs recorded for this key. Read-only. Call this first.","read_only":true},{"name":"civil_read_table","title":"Read a CIVIL NX table","description":"Use for the raw rows of one model-input table. For analysis results use preview_result_table; for a model overview use civil_status. Reads one MIDAS database table (GET /db/<TABLE>) from the open model, e.g. NODE, ELEM, SECT, GRUP, STLD, STAG, LLAN, MVLDBS, LCOM-GEN. Returns rows keyed by id: the ids asked for, or the first `limit` rows. Read-only.","read_only":true},{"name":"job_status","title":"Status of a long-running tool call","description":"Use only with a jobId that another tool returned. Status, progress and (when finished) the result of a tool call that returned a jobId. Poll every few seconds until status is done or failed.","read_only":true},{"name":"model_health_check","title":"Model health check (QC + results benchmarks)","description":"Use for \"is anything wrong with my model?\". This is the full check: it runs model_qc_check's fourteen checks plus units, tendons, stages, moving loads and results. Prefer it to model_qc_check. One read-only check of the open CIVIL NX model for anything that is likely wrong, grouped into areas with a red/amber/green status each. DATA (no analysis needed): the Model Report's fourteen QC checks plus ","read_only":true},{"name":"model_qc_check","title":"Model QC checks (Model Report)","description":"The Model Report's fourteen checks only; model_health_check runs these and many more, so prefer it unless the user asks for the Model Report checks alone. Runs the Model Report plugin's fourteen quality checks on the open CIVIL NX model: duplicate (coincident) nodes, orphan nodes, zero-length and duplicate elements, elements without material/section, unused properties, disconnected regions, suppor","read_only":true},{"name":"model_report_images","title":"Pictures the model report can carry","description":"Use before model_report_export, to pick the pictures for the report. Lists the CIVIL NX pictures the Model Report can put in this model's report, with their keys: FE model views (iso, plan, front, side), the applied loads of each static load case, the figures saved in the model (/db/UFIG), and the beam diagrams on offer (each static case, combination and construction-stage part × components Fx…Mw)","read_only":true},{"name":"model_report_export","title":"Model report document (HTML, Excel, Word, PDF)","description":"Use for the whole-model report document. For construction stages use cs_stage_report; for a design calculation sheet use ec2_export_calc_sheet or cs455_export_calc_sheet; for raw tables use export_result_tables. Builds the Model Report plugin's 'Model report' for the open CIVIL NX model — cover, contents, materials, sections (with drawings), supports and springs, load cases, combinations and loads","read_only":true},{"name":"model_bridge_summary","title":"Model to IFC — what the exporter sees","description":"Use before model_to_ifc or model_to_dxf, to see what the exporter finds. For a general model summary use civil_status. Reads the open model's geometry tables and CIVIL NX's computed section properties and reports the bridge the Model to IFC plugin finds in it: girder lines, piers and pylons (station, elements, bearings, foundations), abutments, bearings, the deck alignment and its line/arc fit, th","read_only":true},{"name":"model_to_ifc","title":"Model to IFC — export the model to IFC4 / IFC4.3","description":"Use to export the model to IFC (BIM). For 2D drawings use model_to_dxf. Exports the open CIVIL NX model to IFC with the Model to IFC plugin: real section outlines with voids, smooth tapers, tendons, composite deck slabs, materials, structure groups and stages; in IFC4.3 also the bridge structure (deck, piers, abutments, bearings, alignment); optionally the structural analysis model with loads, com","read_only":true},{"name":"model_to_dxf","title":"Model to IFC — DXF drawings and 3D DXF","description":"Use to export the model as DXF drawings. To import a DXF use dxf_import. Draws the open CIVIL NX model as DXF with the Model to IFC plugin's drawing engine: a 2D drawing file (DXF 2000: plan, elevation developed along the deck, hidden-line isometric, section cuts with hatched faces and tendon ducts, and every section in use dimensioned) and a 3D DXF (one polyface mesh per element, layered by role,","read_only":true},{"name":"create_nodes","title":"Node Generator — create nodes","description":"Use to create many nodes from coordinates, with the plugin's checks. For nodes plus elements use civil_write_tables; for a whole deck use skew_grillage. Creates nodes in the open CIVIL NX model from X, Y, Z coordinates with the Node Generator plugin's own engine: every check the plugin window makes (blank or non-numeric coordinates, bad or duplicate ids, ids above 999999, ids that already exist, c","read_only":false},{"name":"create_nodes_undo","title":"Undo a create_nodes run","description":"Use only to reverse a create_nodes run (from its ledger); every write tool has its own undo. Reverses a create_nodes run from the ledger: deletes the nodes it created and moves every node it overwrote back to its earlier coordinates. Refuses while elements, structure groups or supports use the nodes it created (undo those first). Default: the latest create_nodes run not yet undone. Previews unless","read_only":false},{"name":"pd6694_route_a","title":"PD 6694-1 Route A earth pressures","description":"Use for PD 6694-1 integral abutment earth pressures by the limit-equilibrium route, with no model. For the soil-structure interaction route use pd6694_ssi_plan. PD 6694-1 integral abutment earth pressures by the limit-equilibrium route (K*, cl.9.4.3/9.4.4) with the PD 6694-1 Integral Abutment plugin's own engine: thermal movement and design displacement, the route (A1/A2, or B / review when Annex ","read_only":true},{"name":"pd6694_route_a_write","title":"Write PD 6694 Route A pressures","description":"Use after pd6694_route_a, to write its pressures on the abutment walls. Writes the four PD 6694 limit-equilibrium states as plate pressures on one or two abutment wall groups, exactly as the plugin's Write button: same-model guard, the PD6694 EP load cases and groups, pressure items (other loads on the plates kept), then verification of the totals against the calculation; optionally activates them","read_only":false},{"name":"pd6694_route_a_remove","title":"Remove PD 6694 Route A cases","description":"Use to remove the Route A cases; it is also the undo of pd6694_route_a_write. For SSI results use pd6694_ssi_remove. Removes the four PD6694 EP limit-equilibrium load cases with their pressures, load groups and stage activations (the plugin's Remove). Other load cases are kept. Previews unless apply: true.","read_only":false},{"name":"pd6694_ssi_plan","title":"Plan a PD 6694 Annex A (SSI) run","description":"Step 1 of a PD 6694 Annex A (SSI) run. For the limit-equilibrium route use pd6694_route_a. Read-only: changes nothing in the model. Call it before pd6694_ssi_run, with the same inputs, to check that the PD 6694-1 Annex A soil-structure interaction run can go ahead — it uses the plugin's own planner. Needs abutments[].group (the wall plates' structure group) and ssi.deckGroup; the soil and thermal ","read_only":true},{"name":"pd6694_ssi_run","title":"Run PD 6694 Annex A (SSI)","description":"Use only for the PD 6694 Annex A iteration. For a normal analysis use civil_run_analysis. Runs the PD 6694-1 Annex A iteration with the plugin's own runner: Winkler springs on the walls (multi-linear), repeated analyses until the wall displacements settle, then the two design pressure cases written and the analysis set-up removed — keeping a backup of the model's own springs for undo. Takes minute","read_only":false},{"name":"pd6694_ssi_remove","title":"Remove PD 6694 SSI results","description":"Use to remove what pd6694_ssi_run left; it is also its undo. For Route A cases use pd6694_route_a_remove. Removes everything an SSI run left (design pressure cases, spring groups, analysis cases) and restores the model's own springs from the run's backup (the plugin's Remove SSI). Previews unless apply: true.","read_only":false},{"name":"point_to_patch_dispersal","title":"Wheel load dispersal to a patch","description":"Use for one wheel or point load's dispersal patch, with no model. To convert the model's loads use point_to_patch_apply. The Point to Patch Convertor's dispersal for one point load: the code's contact area (or the load-derived one), the spread through surfacing and slab to the mid-plane or neutral axis, the effective patch b_eff × l_eff and its pressure, with the clause. Presets cover EN 1991-2 LM","read_only":true},{"name":"point_to_patch_read","title":"Read the model for patch loads","description":"Use before point_to_patch_apply. Read-only. Reads the open model as the Point to Patch Convertor does: whether the deck is plates or a grillage, its levels and groups, the point loads (nodal and beam concentrated) per load case that could be dispersed, any PATCH_ cases already written, and every preset with what it still needs. Read-only.","read_only":true},{"name":"point_to_patch_apply","title":"Disperse point loads into patch loads","description":"Use to turn the model's point loads into dispersed patch loads. For new traffic use ec_moving_loads or cs454_moving_loads; for new point loads use civil_loads_supports. Converts the model's point loads (or a coordinate table) into dispersed patch loads with the Point to Patch Convertor's engine and writes them as PATCH_<case> load cases: plate decks get pressures on the plates the patch covers, gr","read_only":false},{"name":"point_to_patch_undo","title":"Undo a patch-load run","description":"Use only to reverse a point_to_patch_apply run (from its ledger); every write tool has its own undo. Undoes the latest point_to_patch_apply run (or the run named) with the plugin's cleanup: every PRES / BMLD row the run touched is put back as it was, the PATCH_ cases it removed are restored and the ones it created deleted. Previews unless apply: true.","read_only":false},{"name":"civil_loads_supports","title":"Supports and loads in one call","description":"Use for any support, spring, release, self-weight, nodal load, UDL, pressure or temperature you can state directly. For code-derived loads use ec_wind_apply, bridge_thermal_apply, ec_moving_loads or cs454_moving_loads. The fast way to add supports, point springs, beam end releases, self-weight, nodal loads, beam UDLs, plate pressures and element temperatures: describe WHERE (structure group, id ra","read_only":false},{"name":"civil_combinations_quick","title":"Load combinations from factors","description":"Use for a few hand-picked combinations. Writes general load combinations from plain factors, e.g. { name: \"ULS1\", factors: { \"SW\": 1.35, \"SDL\": 1.35, \"LM1\": 1.5 } } — for hand-picked combinations; for the full code set use ec_combinations_apply / cs454_combinations_apply. Each name is looked up: static load cases (ST), moving-load cases (MV) and existing combinations (CB) are recognised, and a com","read_only":false},{"name":"civil_remove_loads","title":"Remove loads, supports or load cases","description":"Use to take out loads, supports or load cases you name. To reverse a plugin run use that plugin's undo; for wind or thermal cases use ec_wind_remove or bridge_thermal_remove. Takes loads out of the model without touching other load cases: CIVIL NX keeps every case's beam loads, nodal loads, pressures and temperatures of an element or node in ONE row, so a plain delete would take the other cases wi","read_only":false}],"server_info":{"name":"civil-nx","title":"MIDAS CIVIL NX tools (MIDAS IT Europe)","version":"0.7.0"},"category":"analytics","tags":["developer","design","travel"],"kind":"remote","source":"registry","submitted":{},"first_party":true,"domain_rank":null,"score":100,"indexable":true,"first_seen":"2026-10-26","stars":0,"badges":["new"],"sponsor":null,"page":"https://agentsindex.org/agents/com-midasiteurope-civil-nx/"}