MIDAS CIVIL NX tools (MIDAS IT Europe)
OnlineNewBuild, check and report on MIDAS CIVIL NX bridge models and design tendons, with MIDAS IT plugins.
What it can do: 80 tools
auto_structure_groupsUse to group elements automatically by section, material or both. For groups by position or by construction-stage segment use stage_groups; for one group of ids you already know use civil_write_tables (GRUP). Creates oneauto_structure_groups_undoUse only to reverse a auto_structure_groups run (from its ledger); every write tool has its own undo. Reverses an auto_structure_groups run from the ledger: deletes the groups it created and puts every group it added memb2p_surveyread-onlyUse before b2p_convert, to see which beams and sections can become a plate or solid mesh. To read a section's shape use section_read; for bar placement in a design check use ec2_describe_section or cs455_describe_sectionb2p_convertUse to replace beam elements with a plate or solid mesh of their real cross-section (a detailed local model). Not for building a new deck (skew_grillage) or changing spans (bridge_reshape). Converts beam elements into ab2p_undoUse only to reverse a b2p_convert run (from its ledger); every write tool has its own undo. Undoes a b2p_convert run from the ledger with the plugin's own Undo: removes the virtual beams, the plates/solids, the rigid linbridge_reshape_readread-onlyUse before bridge_reshape, to see the existing bridge's spans, skews, alignment and levels. Read-only. Reads the open model the way the Bridge Reshaper plugin (1.0.6) does: the deck (straight, in straight pieces kinked abridge_reshapeUse to change the spans, support skews, alignment or deck levels of a bridge that is already in the model. For a new deck use skew_grillage; for geometry from a drawing use dxf_import. Changes the geometry of the bridgebridge_reshape_undoUse only to reverse a bridge_reshape run (from its ledger); every write tool has its own undo. Undoes a bridge_reshape run from the ledger with the plugin's own Undo: every row the run overwrote is written back and everybridge_thermal_calcread-onlyUse for code temperature values of a bridge (EN 1991-1-5, CS 454, BS 5400-2) without touching the model. To write them use bridge_thermal_apply; for a temperature you already know use civil_loads_supports (temperature).bridge_thermal_readread-onlyUse before bridge_thermal_apply, to find the deck and its sections. Read-only. Reads the open model the way the Bridge Thermal Loads plugin does: the deck from a structure group, element list or the CIVIL NX selection, gbridge_thermal_applyUse to write code-derived bridge temperature load cases (EC1T_…) on the deck. For a single temperature value you already have, civil_loads_supports (temperature) is simpler. Calculates the temperature actions for the decbridge_thermal_undoUse to reverse the latest bridge_thermal_apply or bridge_thermal_remove run. To clear every EC1T_ case whoever wrote it, use bridge_thermal_remove. Undoes the latest bridge_thermal_apply or bridge_thermal_remove run (orbridge_thermal_removeUse to delete every EC1T_ thermal load case, whichever run or window wrote it. To reverse one run only use bridge_thermal_undo; for other loads use civil_remove_loads. Removes what the Bridge Thermal Loads plugin writes:concurrent_forces_setupread-onlyConcurrent forces, step 1: use before concurrent_forces to list the items, effects and load states the model offers. Read-only. Concurrent Force Reporter, step 1. Reads the open CIVIL NX model the way the plugin does wheconcurrent_forcesread-onlyUse for the forces that act together with the extreme of ONE effect (e.g. My max with its concurrent N and Vz). For which load cases make up a combination use combination_contributions; for plain result rows use preview_concurrent_forces_proberead-onlyUse only to diagnose why concurrent_forces finds no results for a source; not a result reader. Concurrent Force Reporter diagnostics. For each result source the plugin reads (beam, truss, plate, general link, elastic lincs454_lane_layoutread-onlyUse to lay out CS 454 notional lanes on a carriageway width, with no model. For EN 1991-2 lanes use ec_lane_layout; to write lanes and vehicles use cs454_moving_loads. Lays out CS 454 notional lanes, remaining areas, foocs454_moving_loads_readread-onlyUse before cs454_moving_loads. For Eurocode traffic use ec_moving_loads_read. Read-only: changes nothing in the model. Call it before cs454_moving_loads to see what the CS454 - Moving Load Wizard would do. Returns: existcs454_moving_loadsUse for UK CS 454 assessment live loading (lanes, vehicles, moving-load cases). For EN 1991-2 traffic use ec_moving_loads; to spread existing point loads into patches use point_to_patch_apply. CS 454 assessment live loadcs454_moving_loads_undoUse only to reverse a cs454_moving_loads run (from its ledger); every write tool has its own undo. Removes the lanes, vehicles, cases, envelopes and groups a cs454_moving_loads run wrote, using the plugin's own cleanup (cs454_combinations_readread-onlyUse before cs454_combinations_apply. For Eurocode use ec_combinations_read; to list or explore the combinations already in the model use combination_tree. Reads the open model the way the CS 454 Load Assessment Combinatics454_combinations_applyUse for the full CS 454 (UK assessment) combination set. For EN 1990 use ec_combinations_apply; for a few hand-picked combinations use civil_combinations_quick. Generates CS 454 assessment load combinations with the plugcs454_combinations_undoUse only to reverse a cs454_combinations_apply run (from its ledger); every write tool has its own undo. Undoes the latest cs454_combinations_apply run (or the run named) with the plugin's cleanup: deletes the rows it wrcs455_describe_sectionread-onlyStep 1 of a CS 455 (UK assessment) concrete section check. For a Eurocode check use ec2_describe_section; only to read or edit a section's shape use section_read. Start here when the user shares a reinforcement drawing,cs455_assessread-onlyUse for CS 455 (UK assessment) ULS of RC beam, column, pier or pile sections. For EN 1992 use ec2_section_check; for slabs and plates use slab_assess; for stresses use stress_profile or sls_stress_check. CS 455 ULS assescs455_export_calc_sheetread-onlyUse for the CS 455 Excel calculation sheet of one element end. For EN 1992 use ec2_export_calc_sheet. The report. Assesses one element end exactly as cs455_assess and writes the plugin's reference-format calculation sheecs_stage_summaryread-onlyUse to list the construction stages already in the model (durations, groups activated). To create stages use construction_stages; for stage results use cs_stage_results. Reads the construction stage definition of the opecs_stage_resultsread-onlyUse for construction-stage analysis results, stage by stage. For results that are not per stage use preview_result_table; for the Excel / PDF report use cs_stage_report. Reads construction-stage analysis results the waycs_stage_reportread-onlyUse for the construction-stage report (Excel, PDF, video). For the whole-model report use model_report_export. Makes the Construction Stage Reporter plugin's own reports of the open model's construction stages and returnculvert_previewread-onlyStep 1 of a 2D box culvert built from inputs (Eurocode). Not for bridge decks (skew_grillage). Validates a 2D Culvert project with the plugin's own Eurocode core and returns what it would build: nodes, elements, soil sprculvert_buildUse to write the 2D culvert model after culvert_preview. Only for culverts. Writes the 2D Culvert model exactly as the plugin's Build: units, user material, sections, frame, soil springs, supports, every basic load caseculvert_build_undoUse only to reverse a culvert_build run (from its ledger); every write tool has its own undo. Deletes every row a culvert_build wrote (combinations, loads, load cases, springs, supports, groups, elements, nodes, sectionsculvert_analyse_and_checkUse only on a culvert made by culvert_build. To analyse any other model use civil_run_analysis. On the culvert model built from the same inputs (refused if the open model's counts differ): runs the CIVIL NX analysis (unlculvert_reportread-onlyUse for the culvert calculation report. For a general model report use model_report_export. Runs the checks on the analysed culvert model (as culvert_analyse_and_check, without re-analysing unless analyse: true) and writmidas_docs_searchread-onlyUse for how-to questions, what a CIVIL NX input means, or a MIDAS API table's fields. For valid names (material grades, section shapes) use midas_library. Searches the MIDAS help centre (support.midasuser.com), live: themidas_docs_readread-onlyUse after midas_docs_search, to read one article in full. Reads one MIDAS help-centre article in full, as Markdown: headings, notes, input tables, and for the MIDAS API manual the URI, methods, JSON schema and JSON exampdxf_inspectread-onlyUse before dxf_import, to see what a DXF would create. No model needed. Reads a DXF with the Advanced DXF Importer plugin's own parser and clean-up and reports what an import would create: the file (version, encoding, endxf_importUse to bring geometry from a DXF drawing into the model. For a deck from parameters use skew_grillage; for nodes from a coordinate list use create_nodes. To export a DXF use model_to_dxf. Imports a DXF into the open CIVIdxf_import_undoUse only to reverse a dxf_import run (from its ledger); every write tool has its own undo. Removes what one dxf_import created, with the plugin's own removal rules: it refuses unless the import's master group is in the oec_combinations_readread-onlyUse before ec_combinations_apply. For CS 454 use cs454_combinations_read; to list or explore the combinations already in the model use combination_tree. Reads the open model the way the Eurocode Load Combinations plugin
…and 40 more.
Connect it
claude mcp add --transport http midas-civil-nx-tools-midas-it-europe https://midasiteurope.com/mcpSettings → Connectors → Add custom connector
URL: https://midasiteurope.com/mcp{
"mcpServers": {
"midas-civil-nx-tools-midas-it-europe": {
"url": "https://midasiteurope.com/mcp"
}
}
}{
"servers": {
"midas-civil-nx-tools-midas-it-europe": {
"type": "http",
"url": "https://midasiteurope.com/mcp"
}
}
}Questions
What does MIDAS CIVIL NX tools (MIDAS IT Europe) do?
Build, check and report on MIDAS CIVIL NX bridge models and design tendons, with MIDAS IT plugins. It exposes 80 tools to AI assistants.
What tools does MIDAS CIVIL NX tools (MIDAS IT Europe) provide?
80 tools, including auto_structure_groups, auto_structure_groups_undo, b2p_survey, b2p_convert, b2p_undo, bridge_reshape_read, bridge_reshape, bridge_reshape_undo, bridge_thermal_calc, bridge_thermal_read, bridge_thermal_apply, bridge_thermal_undo….
How do I connect MIDAS CIVIL NX tools (MIDAS IT Europe) to Claude, ChatGPT or Cursor?
Add the remote MCP endpoint https://midasiteurope.com/mcp as a custom connector or MCP server. Copy-paste setup is on this page.
Does MIDAS CIVIL NX tools (MIDAS IT Europe) require an account or API key?
No sign-in was needed to list its tools. Individual tools may still need an account or API key.
Is MIDAS CIVIL NX tools (MIDAS IT Europe) online?
As of 2026-11-19 our probe found it online. It answered 100% of our last 3 checks.
Who publishes MIDAS CIVIL NX tools (MIDAS IT Europe)?
midasiteurope.com. The official MCP Registry verified that the publisher controls this domain before accepting the listing.
Similar in Analytics & BI
-
Google MonitoringOnlineOfficialPopular
Gain visibility into the performance, availability, and health of your apps and infrastructure.
-
beehiivOnline · sign-in requiredOfficialPopular
Manage beehiiv newsletters, posts, podcasts, community, subscribers, and analytics.
-
Kong KonnectOnline · sign-in requiredOfficialPopular
Manage Kong Konnect AI and API gateways, routes, plugins, and analytics from your agent.
-
UserpilotOnline · sign-in requiredOfficialPopular
Product analytics, user and company insights, surveys and NPS, reports, dashboards, and more.
-
PaddleOnline · sign-in requiredOfficial
Query and manage Paddle Billing: pricing, subscriptions, payments, revenue reports and webhooks.
-
Avalara E-Invoicing & Live ReportingOnline · sign-in requiredOfficial
Provides access to Avalara E-Invoicing and Live Reporting APIs for document statuses and compliance